How to use the SONAX CC36 Ceramic Paint Coating

[asap2stacks]

Nice write up mike! I love the flex 3401 it's my go to tool when doing Correction work, it makes any job a breeze! That and a 3" tool and your good to go!


Sent from my iPhone using AGOnline

[Mike Phillips]

Great how to on CC36.

Thanks Michael...

Great looking results Mike!

A concern comes up when I watch/read those jobs since I live in a dusty area, our climate -almost year round- has fine dust flying around.

Should this worry me when performing such ceramic coatings or sealants/waxes?

Are there any solutions for such climates?

Regards,
Ali

It's never a "good thing" to work on car paint for ANY step where it's dusty. But if that's what you have to deal with, outside of moving then you just do the best you can.

Hopefully you're working inside an enclosed building. Maybe sweep or vacuum the floor after the compounding and polishing steps and before the coating steps.

Maybe like some painters, spray the flow down with water before the coating steps to prevent your feet from stirring up dirt and dust on the floor as you work around the car and causing it to become airborne.