Thanks: 0
Likes: 0
Dislikes: 0
-
Regular Member
Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
I was recently contacted by a local company(please note I have no affiliation with either company) to see if I could help them out with the condition of some of their trucks. The two Freightliner Sprinter 2500s in this post were bought in 2012, had never been detailed and were taken off the road sometime in the past year. The company decided to start using these vans again and didn’t want to have a couple of dull, oxidized billboards driving around CT presenting a poor image for their company. The goal here was to remove the oxidation, bring back the shine and reflection to the paint and thereby avoid having to repaint or wrap these trucks in vinyl. The process for both was an ONR wash, clay for the rear doors (only area where there was really much contamination), HD Speed via an Orange LC light cutting pad on the Rupes 21, Optiseal for additional protection and Meg’s ASD on the tires and trim. The rims were really hammered on both trucks, even full strength OPC wasn’t doing much, but this wasn’t a big deal since the main concern was the paint.
Before (note how dull the paint was- nearly zero reflection):
DSC05658 by Pinnacle Auto Detail - CT, on Flickr
DSC05659 by Pinnacle Auto Detail - CT, on Flickr
DSC05660 by Pinnacle Auto Detail - CT, on Flickr
DSC05661 by Pinnacle Auto Detail - CT, on Flickr
DSC05663 by Pinnacle Auto Detail - CT, on Flickr
DSC05666 by Pinnacle Auto Detail - CT, on Flickr
DSC05667 by Pinnacle Auto Detail - CT, on Flickr
DSC05669 by Pinnacle Auto Detail - CT, on Flickr
Afters:
DSC05671 by Pinnacle Auto Detail - CT, on Flickr
DSC05672 by Pinnacle Auto Detail - CT, on Flickr
DSC05673 by Pinnacle Auto Detail - CT, on Flickr
DSC05674 by Pinnacle Auto Detail - CT, on Flickr
DSC05675 by Pinnacle Auto Detail - CT, on Flickr
DSC05677 by Pinnacle Auto Detail - CT, on Flickr
DSC05678 by Pinnacle Auto Detail - CT, on Flickr
DSC05679 by Pinnacle Auto Detail - CT, on Flickr
DSC05680 by Pinnacle Auto Detail - CT, on Flickr
The second truck had less oxidation and more hard water spots.
Before:
DSC05611 by Pinnacle Auto Detail - CT, on Flickr
DSC05613 by Pinnacle Auto Detail - CT, on Flickr
After:
DSC05617 by Pinnacle Auto Detail - CT, on Flickr
DSC05620 by Pinnacle Auto Detail - CT, on Flickr
DSC05624 by Pinnacle Auto Detail - CT, on Flickr
DSC05630 by Pinnacle Auto Detail - CT, on Flickr
DSC05631 by Pinnacle Auto Detail - CT, on Flickr
Thanks for looking! Hope you guys enjoyed a change from the usual car/suv posted on here, any comments or questions are welcome.
-
Super Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
Marvelous work as always on those two work trucks
-
Super Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
You've got that yellow popping. Nice work!!
Sent from my KFSOWI using Tapatalk
2009 Volvo S60 2.5T Black 2011 Mini Countryman Oxford Green Metallic
-
Super Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
Great work on those vans buddy!
-
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
-
Super Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
Man that's a lot of real estate on those vans. Must have taken a long time.
Always keep the shine in your life.
-
Regular Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
That is some really nice work.
The secret to getting ahead, is getting started..... ~Mark Twain
-
Regular Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
Thanks guys!
runrun411- The working time actually wasn't too bad; the yellow one took around 5.5hrs being that it was the first one and had some bad water spots, the white one was around 3.5hrs (ext. only).
-
Super Member
Re: Resurrecting two Freightliner Sprinter 2500s - Pinnacle Auto Detail - CT
Huge improvement!
Especially since there was all that lettering and what looked like stick on numbers.
I am afraid to use any kind of machine polishing on those surfaces for fear of getting and edge lift and tearing it right off.
Similar Threads
-
By PinnacleAutoCT in forum Show N' Shine
Replies: 2
Last Post: 04-02-2016, 01:21 PM
-
By wing commander in forum Show N' Shine
Replies: 3
Last Post: 04-27-2015, 01:06 AM
-
By PinnacleAutoCT in forum Show N' Shine
Replies: 21
Last Post: 01-06-2015, 09:11 PM
-
By PinnacleAutoCT in forum Show N' Shine
Replies: 16
Last Post: 10-14-2014, 07:00 PM
-
By PinnacleAutoCT in forum Show N' Shine
Replies: 12
Last Post: 10-13-2014, 06:57 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks