autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jul 2011
    Posts
    31
    Post Thanks / Like

    Headlight Restoration and Coating: BMW 525 by WetShine.Net

    Removing old oxidized lacquer and also sanding marks left by previous technician.

    Full process:
    1) Masked with 2 layers of masking tape followed by 2 layers of duct tape.
    2) Machine sand with Ryobi finishing sander using 800 grit, followed by 1000 grit, 1500 and 2000 grit. Plain water used as lube.
    3) Tight corners hand sanded using Optimum No Rinse Wash diluted to QD ratio as lube.
    4) Compounded with Osren Perfect 40 compound and 3.5" Lake Country twisted wool pad with Makita 9227C @ 1500 rpm
    5) Fine compounding with Meguiar's #101 Foam-Cut Compound and 3.5" Lake Country Orange cutting pad with Makita 9227C @ 1500 rpm
    6) Polished with Osren Perfect Cut 2.0 and 3.5" Lake Country White polishing pad with Makita 9227C @ 1500 rpm
    7) Final polishing with Osren Perfect Cut 2.0 and 3.5" Lake Country White polishing with Dodo Juice Das 6 Dual Action polisher @ speed 5.
    8) Remove tape, wipe down surrounding panels and engine bay. Wipe headlights with water.
    9) Coat with GTechniq C1 Crystal Lacquer.











































    Notes: The edges still had some leftover cracking but much reduced. A lower grit number is needed.

    Thanks for looking, all comments are appreciated

  2. #2
    Super Member erock's Avatar
    Join Date
    May 2011
    Posts
    221
    Post Thanks / Like

    Re: Headlight Restoration and Coating: BMW 525 by WetShine.Net

    Great job! I just wanted to say that the use of duct tape over the masking tape is smart. The first time i did a set of headlights i was suprised how easily one could sand right through blue tape. Whenever i talk to anyone about doing their headlights i always tell them to mask well. Thanks for posting this.

  3. #3
    Junior Member
    Join Date
    Jul 2011
    Posts
    31
    Post Thanks / Like

    Re: Headlight Restoration and Coating: BMW 525 by WetShine.Net

    Thanks erock, I actually got the idea about the duct tape from Japanese detailers. I follow this blog actively: APEC'S BUSINESS BLOG
    Very good blog.

Similar Threads

  1. Ceramic coating after Headlight restoration?
    By sudsmobile in forum Auto Detailing 101
    Replies: 19
    Last Post: 11-08-2018, 10:58 AM
  2. Replies: 16
    Last Post: 10-03-2016, 09:11 AM
  3. Replies: 1
    Last Post: 08-12-2016, 07:11 AM
  4. DP Headlight Restoration Kit vs Mothers NuLens Headlight Renewal
    By RobertJ34 in forum Auto Detailing 101
    Replies: 9
    Last Post: 05-30-2014, 09:02 AM
  5. Replies: 4
    Last Post: 10-09-2013, 04:31 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456