Applied CQuartz to the wife car :)

**RaskyR1** · 03-03-2011, 02:30 PM

Originally Posted by sohail99

^Optimum polymer technologies!

@ others - Where can I get Cquartz?? I got in touch with autoaesthetica but there seems to be a prob with shipping cquartz to my location!!

so looking for alternatives!!

Where you located?

**sohail99** · 03-03-2011, 02:53 PM

^New York(Springfield Gardens) - (my shipper)

btw how's opti-coat holdin' up?

And got a link for Cquartz from AeroCleanse!

Thanks!

**RaskyR1** · 03-03-2011, 03:32 PM

Originally Posted by sohail99

^New York(Springfield Gardens) - (my shipper)

btw how's opti-coat holdin' up?

And got a link for Cquartz from AeroCleanse!

Thanks!

autoaesthetica is in New York too so I'm not sure what the issue would be on shipping...

Opti-Coat has been on my car for about 8 months now and is still beading water like day one for the most part. I've been subjecting it too regular harsh touch-less washes too. The lower panels are starting to accumulate some bonded surface contaminants from the lack of hand washing, but the protection is still there.

**sohail99** · 03-03-2011, 10:46 PM

^Awesome!!!

How many cars can a Cquartz bottle do? and can we layer cquartz too?

btw I think autoaesthetica hasn't got stock currently!

**IID** · 03-03-2011, 11:02 PM

Originally Posted by sohail99

^Awesome!!!

How many cars can a Cquartz bottle do? and can we layer cquartz too?

btw I think autoaesthetica hasn't got stock currently!

I was able to do my Chrysler 300 with 30ml (1 bottle) of CQuartz.

I layer mine with ReLoad,and have not tried layering with anything else.Over on DB,some peep's are trying different layering product's.

**sohail99** · 03-03-2011, 11:11 PM

^Nice!! since mine is a hatchback, I think maybe I can go over vulnerable areas(like the hood, front bumper, fenders, rear bumper and hatch) with a 2nd coat of cquartz!?

What worries me is, I have loads of premium carnauba waxes! Dunno if I can use them over cquartz!? (I have WG Fuzion, souveran paste, signature series II, maxwax

)

but in my case, protection of the paintwork comes first(no covered parking, just a driveway) and after that, a show car shine!

**RaskyR1** · 03-04-2011, 11:51 AM

Originally Posted by sohail99

^Nice!! since mine is a hatchback, I think maybe I can go over vulnerable areas(like the hood, front bumper, fenders, rear bumper and hatch) with a 2nd coat of cquartz!?

What worries me is, I have loads of premium carnauba waxes! Dunno if I can use them over cquartz!? (I have WG Fuzion, souveran paste, signature series II, maxwax

)

but in my case, protection of the paintwork comes first(no covered parking, just a driveway) and after that, a show car shine!

I used about 2/3 of the bottle when I did the RL, and that's a full sized car. CQuartz says you can add a second coat, but timing is important. You can apply any wax or sealant you want on top of it.

**mdb917** · 03-04-2011, 11:56 AM

Great job on the RL. I had a 2001 CL Type-S in Nighthawk Black Pearl and thought it was one of the best looking blacks out there.

**richy** · 03-05-2011, 02:01 PM

Originally Posted by sohail99

^Awesome!!!

How many cars can a Cquartz bottle do? and can we layer cquartz too?

btw I think autoaesthetica hasn't got stock currently!

A bottle will do one normal sized car, glass and trim and possibly wheels. HERE is a link where I put a double layer of it on my new MKX. Once the first layer has cured and been buffed, you can do a 2nd layer. You'll end up using 2 bottles if you do that to your whole car. I think I used about 1.5 bottles when I did it. I also used their old Aquartz on the wheels and wheel wells and the interior wood trim as well. Check it out.