2020 Kia Stinger GT-Line - A Miracle Detailing - CQuartz Professional

[Mike Moore]

2020 Kia Stinger GT-Line - A Miracle Detailing - CQuartz Professional

Wash and Decontamination:
Wash -
Carpro IronX Snow Soap w/pressure washer
MTM Hydro PF22.2 Professional Snow Foam Cannon
Merino wool wash mitt.

Decon -
CarPro Iron X w/Foam Wax Applicator
Nanoskin AutoScrub Fine Grade Wash Mitt
CarPro ImmoLube (diluted)

Machines:
Rupes 21 with a RUPES 5" Backing Plate
RUPES Bigfoot Nano iBrid Long Neck.

Lighting
Multiple - ScanGrip MultiMatch 3`s
Handheld - ScanGrip Sunmatch 3

Correction:
RUPES Yellow Fine Foam Pad - 5" Dia.
Meguiar`s M110 Ultra Pro Speed Compound

Polishing:
Carpro Gloss pad - 5" Dia.
Meguiar`s M210 Ultra Pro Finishing Polish

Last Step Products:
Cquartz Professional ceramic coating on paint and wheels
CQuartz Dlux Wheel and Trim Coating on trim
CarPro Clarify Glass Cleaner on windows

360 walk-around video - Please click bottom Gear for Quality 1080p w/audio


The Merlin Shot

Drivers side reflecto shot

My Fav Side shot

Full car pic

Another hood shot

The End


Thanks for Looking!

Any questions please feel free to ask.
Please post any feedback in a reply.
Question/Feedback is truly appreciated.

This is a shameless plug...I need the subscribers.
PLEASE subscribe to my social media channels!

[Sizzle Chest]

That flake is insane!!! Superb results Mike! Looks great!

[gofast182]

The metallic flake really pops, nice!

[DMiglio]

Beautiful Mike!!

Couple questions for you, 1)how do you like the iron x foam soap? 2)iron x with foam applicator, is that the IX paste or spray?

Btw, as somebody working on YouTube, I know just how hard it is to make, edit and upload videos, you’ve got yourself a new subscriber!

[Mike Moore]

That flake is insane!!! Superb results Mike! Looks great!

Thank you!

That is very kind.

My Fav pic.

[Mike Moore]

The metallic flake really pops, nice!

Thank you. Yes, it did pop. Very soft paint on the KIA.

Did you check out the video in 1080p? Not bad for a cheap iPhone6

[Mike Moore]

Beautiful Mike!!

Couple questions for you,

1)how do you like the iron x foam soap?

2)iron x with foam applicator, is that the IX paste or spray?

Btw, as somebody working on YouTube, I know just how hard it is to make, edit and upload videos, you’ve got yourself a new subscriber!

Thank you!

1) I like the fact that the IronX foam soap begins the process of decontamination during the initial wash process.
It's not a weekly maintenance soap, but for a prep-wash to aid with decon before full decon, it's a great product.

2) Iron X spray. Let it dwell a minute or two (do not let it dry) then I lightly use the foam wax applicator (with gloves) to spread the iron X before rinsing.
After that I use the Nanoskin (FINE) and Immolube for the final decon. If need I use a third process, I use an ultrafine clay bar for the finishing decon.

Thank you! It was a shameless plug but I'm a bit shy in the YouTube subscriber department. I can use all the subscribers I can get. Thank You again!

[DMiglio]

Appreciate the responses Mike!

I’ve never used IX soap but have always wanted to give it a shot for decon prep work. Nice to see and hear somebody on these forums using it as it doesn’t seem to get much publicity.