Few jobs to kick off 2019! F350 Plow truck, 200k mile Tacoma and Corolla S

[Justin at Final Inspection]

Hope everyone is starting off the new years with good vibes and staying busy! Below are a few jobs that were completed recently.

My buddies seriously neglected F350 plow truck. This thing has hit everything but the lottery! The goal here was just to make it black and shiny again.

Rinseless wash with N914, clayed with Nanoskin medium towel.

One step polish with 3D ONE, Rupes 21 Mark ll, Rupes Yellow pad. Sealed with Mckees high def paint sealant.








Next up was another work truck. A older Tacoma with 200k miles on the clock. He had recently purchased new wheels and had me coat them before the holidays so that made my job a bit easier. The goal here was to get the interior cleaned up, perform a good one step and restore the head lights.

Wash/decon

Hyper wash, Nanoskin fine towel

Correction

Rupes Mark ll 21/Adams swirl killer mini, Rupes yellow pad, 3D ONE

LSP- IGL Premier sealant

Headlights- Sanded with 400 dry, 600 dry, 800 dry, 1000 wet, 2000 wet, 3000 wet. Polished with swirl killer mini, TB wool, Rupes yellow, M100 and 3D ONE

Interior- Mckees total interior cleaner, Mckees carpet and upholstery cleaner, IGL Dash protectant

Running boards- Solution Finish trim restorer












Headlights starting point



400 grit



800



3000



Done
















Next was a repeat client with a Corolla S. Pretty much the same goal here. Good wash/decon, one step and sealant along with a interior clean up.


Wash/Decon

Hyper wash, Meguiars Iron remover, Nanoskin fine towel.

Wheels/tires- Mckees foaming wheel cleaner gel, LATA, Hyper dressing

Correction- Rupes 21, Rupes yellow pad, Griots fast correcting cream

LSP- IGL Premier

Interior- Light clean up with Mckees fast interior detailer

[UncleDavy]

The Corolla must have been the easiest out of those three. That F350 dually must have been the most time consuming but the most rewarding. I just love seeing these transformations.

[Sizzle Chest]

Justin, as I said on another forum, excellent before and after 50/50 shots. Great work and they all came out extremely well. Glad you are rocking and rolling in 2019!

[Justin at Final Inspection]

The Corolla must have been the easiest out of those three. That F350 dually must have been the most time consuming but the most rewarding. I just love seeing these transformations.

Thanks Dave. Actually the f350 wasn't too bad. Didn't need to be overly detailed with it. Took about 6hrs.

Justin, as I said on another forum, excellent before and after 50/50 shots. Great work and they all came out extremely well. Glad you are rocking and rolling in 2019!

[Farmallluvr]

great work Justin,,I've done of a few of those F 350 beasts and they are time consuming even when they don't look as whooped as that one.

[DaveT435]

They all look great. Nice work. That 50/50 shot on the F-350 are incredible.

[SWETM]

Wow that Rupes yellow pad and 3D One does some awesome work together! The 50/50 hood is amazing looking on the F350! Great work and write up and pictures Justin!

/ Tony

[VISITOR]

wow, if there is a testament to what the 3D ONE can do you just proved it. i spoke to someone about the HD line and they mentioned that ONE is basically like a combo of HD Polish and Cut with newer technology...

[Justin at Final Inspection]

Thanks guys. Yeah ONE did a great job removing the oxidation and restoring gloss.