Wet Sanding Gel Coat

[attention2detaillhc]

Here is a project I completed last week. I had a customer who had major oxidation on the transom of his boat.
To complete the job I did my normal wash, then started color sanding with the Mirka Abralon disks. I started with 1000, and worked my way to 4000.
Once completed I used Marine 31, Capt 1 step compound. I used LC CCS Yellow, and then polished with a CCS white pad. Finally I waxed using a Marine 31 Sealer with Carnauba.
All of this was done with a Flex 4301. The first pic is a split before and after. The second, is the transom once completed.

[Colinpd137]

Very nice job bud, quite the transformation.
Boats are fun to work on (sometimes) cleaning the pads after? not so much hehe.

[Bobby B.]

That looks great! Wet sanding sure saves some time with removing oxidation from Gel Coat Boats.

[Markymapo]

Can u clean the Mirka disks or are they used for one section and then tossed

[Sizzle Chest]

Great work on that gel!!