Search:

I recently had the chance to try out the new formulation of the CQuartz leather coating. Avi was gracious enough to send me this along with some of the other new 2021 products.

Product...

I doubt it was rain. It was applied in June when there is no rain in So Cal. If anything we had the June gloom time frame. It was not from a sprinkler as water sports were mostly peppered on the...

Meguiar’s M205 with a Rupes yellow. Was t that hard to remove it. It’s actually not that difficult to remove a coating.



[emoji23]

As always you knock it out of the park. The reflections are fantastic.

I haven't kept up with this thread on AG as much as I have on Autopia.

Is Graphene the next big thing for coatings?

Here is the latest update

I decided to give the Jade Graphene Pro...

Avi of CarPro hooked it up to review the new 2021 product line

https://uploads.tapatalk-cdn.com/20210115/aa0acb862a5ab77375f5dbcbf8305ad0.jpg

DLUX is a plastic and wheel coating. Will work fine on calipers.

You have plenty of wheel coating and high heat options. Gyeon Rim, Gtechniq C5.

You would probably be ok using what you have.

See my post about carpro products. Elixir if you want more protection than EcH20

Graphene infused soap & graphene coating

https://uploads.tapatalk-cdn.com/20210108/c33ffefdbda9bd41da3213d0dcd5e2ca.jpg

You could probably use either one. Beadmaker is used by many with a coating.

You also have Carpro EcH20 as another option. If you want some protection then Carpro Elixir is a good option for...

I have used tuf shine tire coating. I ended up giving it away to a forum member on here or Autopia. I can't recall which forum. It is ok. I have tried it from 2 coats to 6 coats and no matter...

Had a couple comments to request Perl be used undiluted.

Made that update to the panel.


https://www.youtube.com/watch?v=Ww6ktSnI4vA&feature=youtu.be&ab_channel=MikeG

Just a quick update to get an initial performance of each product.

Perl is gone after a week and one wash.


https://www.youtube.com/watch?v=orJIXIlSBWk&feature=youtu.be&ab_channel=Mi ...

Cleaner wax is another term for All In One.

https://uploads.tapatalk-cdn.com/20210104/cfbfdd27e76e39d5fbe06cd3bff78d27.jpg

I agree with Rsurfer. Invest in the newer coatings of theirs as technology in both of the cquartz coatings has changed.

Scangrip handheld. If you want something locally then the Braun handheld from Harbor Freight which is similar to the first generation Scangrip.

Glass is ok. Avoid plastic trim and rubber trim. Those can sometimes get stained. I don't spray it on headlights either but any overspray never caused issues.

1:3 just as CarPro recommends.



Don't own them. They ended up in the trash long ago. Don't have OTC stuff anymore other than a couple items. Major purge to throw stuff away that was taking...

I had a spare plastic panel that I decided to use for a test involving different coatings and sealants. This panel was formerly an interior panel.

I will be leaving this piece of trim outside...

Clean the top of the bottle before resealing the bottle. Reseal it tight and put it on your shelf inside to keep it out of temperature extremes and you will be fine. The shelf life should be fine...

Stick with one of the big names in coatings and you will be fine.

Mike gave you many good resources.

In short you are going to need to prep the surface to your liking.

1. Wash
2. Chemical Decontamination aka iron remover
3. Mechanical Decontamination...

The graphene buzzword is strong lol. I agree with you though. The benefit of a spray product is its ease of use at any time.

I made this video a couple weeks ago. Yes this soap does indeed do what it says in leaving protection. The strong beading has diminished quite a bit in 3 weeks time.

...