Search:

I wouldn’t worry too much about it. Enjoy the weekly maintenance regiment with the occasional chemical decontamination.

You will know when it’s time to polish and re-coat as you will get those...

Flex PXE 80 if you do t want to spend the money for the ibrid.

This is one of the risks of washing after correction with the potential to marr the paint. I doubt it is the towels as I have used those Guzzlers in the past without any issues. Unless there was...

Yes and it was mentioned in this weeks live video on AG's youtube channel that this is a sheeting type product.

Colourlock is good stuff. Their basic recommendation is leather 3 years or older go with their protector. Can be topped with shield the following day to add abrasion resistance and dye transfer...

Get yourself some McKee’s 37 20/20 cockpit glass cleaner to polish the inside of the glass. Adams brilliant glaze is another thing that works good on front glass.

You will enjoy it. It is good.

These leather coatings I linked in the reviews offer UV protection if UV is a concern. A majority of modern day glass blocks out UV. If you like to use 303 or an interior detailer then keep using...

https://www.autogeekonline.net/forum/product-reviews/128386-review-cquartz-leather-2-0-a.html

...

I had my entire dash coated at one point and it held up really well. It didn’t attract dust.

If you top it you will be back where you started with dusting. My advice would be to just wipe it...

None are going to give gloss. Interior coating will darken at best.

Here are a couple photos of me testing a few on my dash. Cquartz 2.0 looks even better than the previous version.
...

I have used it. It works ok. I personally don’t have a need for it but it seems to work fine.

Don’t expect the pH to be high on it. It also won’t damage a coating at the pH level I measured at...

This over solution finish looks really good. Looks even darker when topped with PBL trim restorer.

Used it on this FJ.
...

I have tossed my applicators when using CanCoat. They have all become crunchy. I have also relegated all coating towels to dirty jobs after a pre-soak in the bucket with some microfiber detergent. ...

Welcome to the forum

Had the same experience with one of their subsidiary brand tires aka General taking the newest tire coating from McKee’s. I ended up having to apply an additional three coats after two weeks due to...

EcH20 is used by many as a drying aid at that ratio. Reload and Elixir are changing the properties as well as they leave protection behind.

EcH20 is already diluted at such a low concentration...

Looks good. Next time you use those tuf shine applicators, massage the product into the applicator to prime them. Makes them easier to work with and they apply coating evenly as they are less stiff.

It does not take much to remove a coating. A medium cut polish will be fine. If you are removing defects then you more than likely removed the coating. Especially an aged coating. You could...

9 min in Chris West mentioning it. There is another floating around somewhere. I am not going to go back and watch all of the videos again lol.

...

Yes it is doable to get around a car in 1 hour or even less. Depends on the size. CQ Lite is wipe on wipe off. I forgot to mention it is a bit tacky to wipe off but it is also forgiving when it...

My first choice would not have been cerakote. It would have been solution finish to see how that does to restore trim.

As mentioned above the heat gun will turn plastic brittle. One time would...

I am going to mention this. The Gtechniq reps have stated that their coatings are gas permeable. They have mentioned this on one of the recent rag company podcasts.

You will more than likely...

Scangrip is still better with the different color modes. The HF Braun will get you by.

Happy Birthday Mike. Enjoy the time off.