CanCoat will be fine over the vinyl. It will "richen" the black just a bit but will not add any gloss or sheen. Apply as you would the paint, maybe just slightly heavier...
Yes straight to CanCoat would have been best but no worries. If you want to experience Cure for a month or two go ahead and do so. Then perform a few good washes with Foam, a heavy...
As said below, the products you are mentioning are only available within the GYEON Certified Detailer Program and not available on the open market. But to offer some information:
That will heavily depend on the level of marring caused by Compound that we are asking Primer to remove.Compound is a great mid range polish that will finish down nicely on certain paints and not at...
Q2 LeatherCoat will be fine over these surfaces. Just clean well and make sure there are no existing products applied and go right ahead with LeatherCoat. I like to spray 2 spays on...
The potential for water spotting is not GYEON specific. I would definitely recommend going over the necessary maintenance for all coated vehicles. Water spotting is more of an issue within the first...
the microfiber towel is recommended because of the speed in which the product is applied to the surface and the speed in which the carrier solvent begins to evaporate. You can use a small suede...
You can apply any wax or sealant you'd like over a coating. It will not degrade the underlying layer. However as stated below you will experience the performance of that outer layer in terms of gloss...
Good Morning! If soaked immediately in an APC mix and then washed you can get a few uses out of a MF towel. For me, I always use a brand new towel for coating application of any kind. It is worth it...
Good morning! Sounds like Primer was worked a bit too long and with a bit too much pressure? Subaru paint is historically finicky in terms of its temperature tolerance. I have done this many times....
Good Morning! Two very different products, both awesome. PURE is a different chemical makeup completely than MOHS so will have different install and performance characteristics. PURE is designed as a...
Good morning! Yes you can use the remaining SKIN down the road as needed. Good wash with Bathe, Iron decon if you'd like, Prep, and then on with SKIN. I would start with a light amount of SKIN in...
Good Morning! I have not heard of any plans to release SKIN as a stand alone product. We are approaching SEMA and AutoMechanika so you never know what will pop out. The factory keeps everything...
No problem! I think you are on the right track. Once you tweak that process I think you will really enjoy it. And I totally get the feeling of it not cooperating!
The communication did come straight down from GYEON that the towels are 70-30. And there are likely some several year old product descriptions floating around that we need to clean up.
No you would not want to be applying TRIM over Solution Finish. We want a pure bond between the coating in the plastics with no other product in between.
