Search:

Could just be contaminated. A rinseless wash is good but a contact wash still does a better job. You could always reapply another coat at anytime.

Keep it clean and it will last quite a bit of time. Abrasion is what will remove it and you will notice the slickness degrade over time. So it is still on your seat unless you were rubbing on your...

M205 is not the polish I would choose to finish out on soft paints. That is its Achilles heel. M210 is better but even that at times struggles on soft paints. Softer paints tend to like a stiffer...

Your paint is now ruined lol. I am kidding. If it worked out well and the paint is looking fine then what's the old saying no harm, no foul. You can fix your dilution next time.

I would not be too concerned with UV. Most glass in modern vehicles will block a majority of the UV. I would be more concerned with heat. With that said Gyeon Preserve is such a good product. It...

Could always invest in the G2 caliper kit which holds up better than the rattle can caliper paint.

It is good but Reset will out clean it and Hyper Wash.

Then get what you have access to. I have only used hyper wash and it is good. As someone mentioned pearl comes in smaller bottles so if you don't like it then you can try something else once you...

Any coating will be fine. Just know they are not impervious to scratching and swirling. You will get to a point where you will need to lightly polish and re-coat. A coating will do better than...

No it does not. Meguiar's D143 to answer your second question.

Can you get your hands on Feynlab products there? If you can look into their pure wash.

Pretty simple. Don't use Perl on those areas. Keep them clean with your interior cleaner or even a detail spray would work fine. If it were me, I would ceramic coat those pieces and use a interior...

Its a suede cloth for things such as glasses or nav screens. Similar to a coating suede applicator.

I recently had the chance to try out the new formulation of the CQuartz leather coating. Avi was gracious enough to send me this along with some of the other new 2021 products.

Product...

I doubt it was rain. It was applied in June when there is no rain in So Cal. If anything we had the June gloom time frame. It was not from a sprinkler as water sports were mostly peppered on the...

Meguiar’s M205 with a Rupes yellow. Was t that hard to remove it. It’s actually not that difficult to remove a coating.



[emoji23]

As always you knock it out of the park. The reflections are fantastic.

I haven't kept up with this thread on AG as much as I have on Autopia.

Is Graphene the next big thing for coatings?

Here is the latest update

I decided to give the Jade Graphene Pro...

Avi of CarPro hooked it up to review the new 2021 product line

https://uploads.tapatalk-cdn.com/20210115/aa0acb862a5ab77375f5dbcbf8305ad0.jpg

DLUX is a plastic and wheel coating. Will work fine on calipers.

You have plenty of wheel coating and high heat options. Gyeon Rim, Gtechniq C5.

You would probably be ok using what you have.

See my post about carpro products. Elixir if you want more protection than EcH20

Graphene infused soap & graphene coating

https://uploads.tapatalk-cdn.com/20210108/c33ffefdbda9bd41da3213d0dcd5e2ca.jpg

You could probably use either one. Beadmaker is used by many with a coating.

You also have Carpro EcH20 as another option. If you want some protection then Carpro Elixir is a good option for...

I have used tuf shine tire coating. I ended up giving it away to a forum member on here or Autopia. I can't recall which forum. It is ok. I have tried it from 2 coats to 6 coats and no matter...

Had a couple comments to request Perl be used undiluted.

Made that update to the panel.


https://www.youtube.com/watch?v=Ww6ktSnI4vA&feature=youtu.be&ab_channel=MikeG

Just a quick update to get an initial performance of each product.

Perl is gone after a week and one wash.


https://www.youtube.com/watch?v=orJIXIlSBWk&feature=youtu.be&ab_channel=Mi ...