Search:

A 30ml bottle should be more then enough to do a mid size car with two coats. I’ve done a mustang and a Mercedes c250 one bottle each was enough for two coats


Sent from my iPhone using AGOnline

Haven’t tried it yet but from what I’ve read Meguiars hyper wash is supposed to be really good. I’m going to be trying it soon as some of the other soap I’m using is gone.

I have a 2014 c250, had same issues but finally found the menzerna FG 400 and megiuars micro fiber cutting pads did the trick.

I use gtechinq matte dash, no scent, leaves interior looking like it came from the factory and last 6 months. It comes in a small bottle but I had more then enough to do two cars with two coats each.

Just went through this myself as I wanted to ceramic coat my car. Best way is to polish it with a light polish then do a IPA wipedown

I can not speak for Tesla but I had a similar hard time removing some light scratches on a Mercedes. I finally got them out with a meguairs mf cutting pad and menzerna 400.


Sent from my iPhone...

Thank you Mike.

I grabbed some mineral spirits last night, so after I polish the car just wipe it down with a soft micro fiber with mineral spirits on it then wipe off with another?


Sent...

The 91% is the level of alcohol I’m using. Not what I have it diluted to

Even if you were applying Gtechniq EXO?

What do recommend a good IPA dilution ration and what percent of alcohol? I’ve been using 91%


Sent from my iPhone using AGOnline

Getting ready to apply EXO to my car, trying to remove the sealant that I had applied I’m using menzerna 3500 and a white pad from lake country. After I did a test spot I did a IPA wipe down. Then...

First time doing it so just want to make sure I do it right.


Sent from my iPhone using AGOnline

Don’t have that, trying to use what I already have.

Would menzerna SF3500 be a better option?

Do you believe that the Wolfgang polish enhancer is a good step for removing the sealant that is currently on there?


Sent from my iPhone using AGOnline

I’m looking to apply Gtechniq EXO to my car. I understand that the paint has to be free from all sealants and waxes. I currently have Wolfgang polish enhancer and plan on using that to prep the...

I agree. Just kicking around trying something new. Wasn’t sure if anyone has had experience with two or all three of them to compare

I’m currently using sonax PNS , I really like the water shedding action that it gives.Possibly looking at trying something new. I was reading and looking into the getchinq c2v3 or the FK1000P.
...

Want to think everyone for the help. I was able to get most of the scratches out with a meguiars micro fiber cutting pad and menzerna 400. The ones that are still there are barely noticeable

...

Not sure I’m comfortable wet sanding. That’s a little out of my comfort zone


Sent from my iPhone using AGOnline

No I don’t. Only have lake country. Was thinking about trying a microfiber cutting pad

I do have a picture but can’t seem to get it uploaded. Keeps giving me a error. You can not feel it with your nail

I have some straight line scratches that I have not been able to get out of my hood of a Mercedes C250. I’ve tried menzerna 400 with a lake county thin orange pad with a rupes 21. I don’t know if...

Pics

I just cut some small thin boards to where they fit really snug. I have a few rows on the top of my cart they are adjustable and nothing tips over