autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

Search:

Type: Posts; User: Serenitynow; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Re: Blackfire One Step . . . Video Demonstration.

    Jayfro, that's my plan.

    I have Lake Country white and orange flat pads and the Griot's 6" D/A. I figured I' d start with test spots using BF One Step with each pad and check the results.

    If I...
  2. Re: Blackfire One Step . . . Video Demonstration.

    Cool. Thanks guys.

    So, I will need to use something between the Megs UC and BF One Step to clean the UC off ?

    What kind of ratio with isopropyl alcohol is best for this kind of thing ?

    By...
  3. Re: Blackfire One Step . . . Video Demonstration.

    Thanks to everyone who has answered my questions in this thread.

    Yes, my truck is a daily driver and is outside 24/7, 365 days a year.
    As I mentioned, I already have Megs UC and BF One Step. I...
  4. Re: Blackfire One Step . . . Video Demonstration.

    Aaryn NZ,
    You said in the first post here that if you were going to be chasing correction you would probably go a different direction.
    Would you expand on that a little please ?

    Could it be...
  5. Replies
    21
    Views
    1,525

    Re: Spray and rinse sealants.

    But I thought that was the whole idea behind these " Spray and Rinse" sealant products - to easily get a sealant layer of protection on every surface of the vehicle's exterior.

    Am I...
  6. Replies
    21
    Views
    1,525

    Re: Spray and rinse sealants.

    Thanks Paul.
    I see you're a big fan of Collinite 845 from other threads.
    I'm looking for something easy to use as a LSP. Would really like a spray and wipe product. I know 845 isn't like this, but...
  7. Replies
    21
    Views
    1,525

    Re: Spray and rinse sealants.

    So, the water on the vehicle won't dilute the BSD enough to make it ineffective?
    Or do you let most of the water from rinsing dry first ?

    Also, after spraying BSD on the wet vehicle, do you just...
  8. Replies
    21
    Views
    1,525

    Re: Spray and rinse sealants.

    Sorry for the newb question, but, how do you use BSD as a drying aid ? What is the equipment and process used ?
  9. Replies
    5
    Views
    379

    Re: Interior LSP

    What's the difference between the GG Interior Cleaner and Interior Detailer products ? I see both, but not sure what uses each is specified for.
  10. Re: Sonax polymer net shield vs collinite 845 for winter ??

    That's a great idea. Do you have a link or something for that velcro handle ? I have several 5.5 inch LC pads I could use for this purpose.
  11. Re: Sonax polymer net shield vs collinite 845 for winter ??

    Thanks for the reply. Just a regular wax applicator foam pad or something more specialized ?

    Sorry about the newb questions. But this will be my first time doing paint correction and sealant on a...
  12. Re: Sonax polymer net shield vs collinite 845 for winter ??

    Nobody has a preference between a microfiber and a foam applicator for PNS ?

    Come on guys.
  13. Re: Sonax polymer net shield vs collinite 845 for winter ??

    I posted this in the other current thread about PNS. I figured I'd post it here too.

    I've read numerous threads about PNS and BSD. I think these are going to be my sealant/topper for the upcoming...
  14. Re: SONAX Polymer Net Shield - Closest thing to a coating without being a coating

    I've read numerous threads about PNS and BSD. I think these are going to be my sealant/topper for the upcoming winter at least.
    I'm unsure of the best way to apply these products though.

    Do...
  15. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Hahahahahahaha

    Now that's funny !!!!!!
    But, I am the same way.

    Seriously computer challenged
  16. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Thanks Paul.
    I've seen the thread about using that app. I browsed through the thread but got lost pretty quickly.

    I guess I'll have to read it thoroughly and see if I can figure it out.

    UPS...
  17. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Thanks again Tony.
    Good advise about using UC. I'll have to try that process.
    If I can figure out how to post pictures, I certainly will. I'm not real good with the whole computer stuff, but I'...
  18. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Ducksfan
    So you're saying to mix di limonene with the Snappy Clean in distilled water to wash my foam pads ?
    I hadn't heard of using di limonene to do this before ? And, I also wasn't aware about...
  19. Re: Pics - Engine Cleaned Using Infinity Wax Rubber Wax

    Ninja, how did you clean the engine before coating it ?
    I just placed an order at AG and am hoping to start cleaning my 2010 Frontier soon. It pretty much needs everything : paint correction and...
  20. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Ok guys. I'd like to thank everyone again for all your help with this decision.

    I placed me order with AG last night. Kept everything the same as what I posted before, except I went with the...
  21. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Another thought.
    I was planning on topping whatever I use for polishing with Collonite 845.
    Would I even need to put something on after using the Blackfire One Step seeing it has a sealant in it...
  22. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Oh man. Sorry guys.

    I just remembered, I have a bottle of Meguiars Ultimate Compound that I got when I was going to do this about 2 years ago. Too much stuff came up and it got put on hold.

    ...
  23. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Wow Tony. Thanks for the detailed reply. I had to read it a couple times to understand it. I think I got it.

    I already have a can of denatured alcohol. Would it be ok to use this on the tree sap...
  24. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Oh heck.
    Just remembered. I'm going to need some Tar Remover too. I think I have some tree sap build up on the roof of my truck in the stiffening channels.
    So, recommendations for this would be...
  25. Replies
    54
    Views
    2,827

    Re: Most Cut / Best Finish

    Ok guys and gals. Here's what my AG Shopping Cart consists of right now . The only things I'm missing are the compound/polish/wax part of the equation I think. Please let me know if I should change...
Results 1 to 25 of 50
Page 1 of 2 1 2