Search:

The rotary mini polisher attachment works great for behind door handles and honeycomb grills. I generally would use the cone shape foam to do this.
...

Great mind thinks alike. LOL

I had the same thought upon the first time using the G8 so I experimented with several items and found the HD part worked the best.

https://i.pinimg.com/originals/dc/2f/41/dc2f413ff50a14643953511c25a13812.jpg

I use this to extend the G8.

Shift Linkage Extension Kit for Harley-Davidson Motorcycles with 5/16"-24 Right-Hand Threaded Ends....

you might want to try a lower dilution ratio (4oz to 10 oz warm water) for the soap solution with the knob turn to the highest soap to water setting.

A higher quality trigger gun (MTM SG28) will...

I have an electric washer that has a reservoir for soap ( not at the tip of the nozzle) and I also have an undercarriage attachment. I filled the reservoir with a strong pre-wash solution...

I totally in agreement. I had similar experience. Once I had the tool in my hand ... it was an easy transition from a rotary for me.

The Flex has a slightly larger throw (8mm) than the Milie...

Holy POPEYE arms... Batman !!!! LOL

If you are used to the rotary then the counter clockwise rotation wont bother you. IMHO.... Most users who had a hard time with this are generally those who...

I have both the 3401 and the new super beast. I also have a Rupes 21 and a GG G15. They all have their places depending on the job at hand. I prefer to compound with Gear driven orbital and...

You gave me this tip a few years back and I been using the prep polish for restoring trims prior in coating them. :xyxthumbs:

Happy B day.... Mike !!!

https://www.pumpitupparty.com/wp-content/uploads/2020/08/happy-birthday-candles-picture-id1202880334.jpg

https://media.makeameme.org/created/ignorance-is-bliss-5a4e315f8d.jpg

This is how it starts.... Welcome to the board.

Sorry to hear about the induced scratches...

GG G9 is a great polisher to start. Tons of power and a lifetime warranty to boot. If paint enhancement is what you are after, G9 and a good AIO is...

Happy B day !!!! Just like Ginger.... the older you gets, the spicier you becomes.

https://i1.sndcdn.com/artworks-000153713262-ndb6sw-t500x500.jpg

I used to do that with my daughter when she was younger. I had her do areas that I couldnt reach. Its not child labor when it is your kid. lol

Great Job as always !!! I hope you didnt have to polish the roll cage.



AND to keep up with the theme of the thread....



https://media.makeameme.org/created/i-have-a-5c75c1.jpg

Yes.. you can

https://www.autogeekonline.net/forum/show-n-shine/128139-2018-range-rover-evoque.html?highlight=evoque

3D One is pad dependent. This is my go to for one step. Very seldom I have to follow that with a finer polish like Reflect. By seeking out the sweet spot between pads and 3D One, I generally...

3D Speed for AIO... I havent tried Rupes Uno Protect or BF One Step ( I did have experience with the old BF formulation years ago but not with Uro-fiber since the pad came out a few years later).
...

I still have a gallon and a half. I bought several gallons several years back when I found out they were discontinuing it.

In some ways Microfibers is more aggressive than wool. Cuts really well but foam seems to finish better (Buff and Shine Uro-Fiber Pads feature a blend of two different microfiber grades into just...

Adam's barrel brush... 2 sizes ( 18" and 20")

https://images-na.ssl-images-amazon.com/images/I/719FuY8bUJL._AC_SX466_.jpg

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSJiIYYM8KuiWkiai8UolvXvoN7A1UF5cmboA&usqp=CAU

Totally agree !!!

Been using it on over a dozen vehicles since it came out. For the cost and ease of application...it is hard to beat. Even if durability is half of what they claimed (12 months) ... it is on par...

Yes.. you could but I still think products that are sun friendly would be ideal. I assuming you will be outdoor unless you are working in the hanger.

3D Speed top with 303 Graphene coating will...