I'm particularly concerned with scratches caused by dirt or other material being present in the window channel or whatever we call that horizontal seam that the window travels up and down through.
...
Bought Megs Leather Cleaner a couple of years ago not knowing that they didn't sell a stand along Leather Conditioner (at least available in gallon size) and I'm not keen on using the Gold Class...
I'm down here in Portland, OR. I use a foam cannon on the power washer and also a foam gun on the house hose. I usually foam, let dwell, then full rinse, foam again, and then do a 2 bucket wash. ...
Good products that don't break the bank? Meguiar's Ultimate Compound, Polish, and Liquid Wax. All three are easy to apply, work, and remove (unless you use too much product, don;t over-saturate your...
The Dr Color Chip will need some time to properly cure. I used that stuff a few years ago and ended up polishing the chip paint right out of the chip after having waited about 3 weeks. So follow...
The dust and pollen are what are killing me right now. Here in Portland it's raining yellow pollen right now and when I park in a garage downtown my car just attracts dust and is just sticks. Black...
Flood the car with a hose for final rinse; leaf blower to dry wheels push water out of seams; then mist panels and glass with Megs x-press spray wax. 1st wipe with Chemical Guys Grey Matter towel on...
Backing plate on the GG random orbital will be 6" to use with the 6.5" pads. If you get 5.5" pads, get a GG 5" backing plate. I'm pretty sure that the GG 3.5" backing plate will work with those LC...
5 minutes to get hose setup;
10 minutes to get brushes and bucket ready for wheels;
10-15 to wash wheels. incl barrels and inside of wheel wells;
15 minutes to get power washer out and set up and...
My wife puts apple cores in the side pocket and "forgets" about it. Coffee cups on the passenger floor. Loose paper all over the place. She's picky about the house being clean, but the...
I applied Megs UFF back in February here in Portland. Rainy winter, rainy spring, very hot summer. Wash my car nearly weekly and use Griots Speed Shine or Megs X-press Wax as a drying aid and my...
It seems to me that most of these products, except for the very expensive ceramic stuff,wax/sealant durability is about the same anyway. But I live in the Portland, OR region where we get a lot of...
Will the current ULW formula haze or should I be doing a swipe test to determine if it's ready to come off? Or is it simple enough that I can just leave ULW on for as long as like before removing?
Preparing to give my 2006 300c SRT8 (black) it's winter protection. I'll be washing, iron-x'ing, claying, and then spot treating with Megs UC, run Megs UP over her, and then....well that's the...
I'm from Royal Oak, MI living out here in the Great Pacific Northwest. I see all these other guys using far more expensive products and start to wonder if I'm using quality material...