search airway buffing wheel if you have a rotary buffer and order a couple of them. Usually i would start with a green wheel and brown bar of compound and move on to a white wheel with a green...
turbo nozzle on a pressure washer should get it (i have gotten many lbs of bonded concrete to release from bedliner with the turbo) or try soaking it in paint remover (from any paint store) then...
When i was setting mine up i went with 100k single vehicle value (with a max of 1 million total value) since it is rare i get anything over 90k in value. But when going over the paperwork i saw that...
goo gone spray gel is nice as you can spray it on and let it dwell and it doesn't run off as fast. I have mixed the goo gone gel 50/50 with goof off and got a stronger product with a bit of...
By hand i would think you are not getting the swirls out in any reasonable amount of time. So, i would just get s decent glaze ( i have used 3d's ultra glaze and it corrects well and fills as well...
For the last month i have been doing 1-2 dealer trucks a week which threw my normal numbers way out of wack since the trucks i am getting generally are trade ins from contractors that have not...
If it turns out to be really soft i would try searching "finishing with H205 from Kevin Brown" it is a great way to finish really soft paint with water mixed with m205 and a soft pad. Seems like a...
I have done quite a few of these and always in the worst condition imaginable as i get them from dealer trade ins from contractors. They range from 4-15hrs with the gross ones being 5ish hours and...
i too like the idea just would have to get a better look at the shop size and run numbers on how many cars can fit in while leaving a workable space and see if that would be enough to justify the...
Just curious if anyone has tried taking the detail your car while you (shop, travel, or whatever will have someone gone for a few hours to a few days). I just saw a lease space open up in the...
thanks for the replies. I might try the recording thing to see where i am losing efficiency as i have been using a timer for each step to see what it takes on average for each sized vehicle. But...
i have the rug dr portable and it works really well, with it i use a good commercial carpet cleaner i got from a local cleaning supply store. I also use folex and chemical guys lightning carpet...
Hey, i am just curious what all of you are taking on average to do a typical detail (wash, clay, seal or 1 step polish/wax, interior detailed vac, minor stain removal, hard surface cleaning). I am...
So i bought a swirl buster kit with some pads and a Porter Cable DA from Eshine.ca (an Canadian autogeek re-seller). I have got maybe 8-12 cars out of it over the last 2 months and it started...
i do 12/ft for a wash. which is foam roof the light scrub and the same process for the rest of unit. For wash and wax i charge 20/ft and that is a wash with a da application of a cleaner wax like hd...
Today i yet again learned that it is not just my ford that is way too chipped up for its age and mileage. Their paint really sucks for the last couple model years. Mine is a 2016 f150 and today's...
do you guys put a contact page on a side bar on every page for ease of access? i do on my other business sites and think it makes it a bit easier for people to get to it but also think it kinda...
Hey guys, it has been a couple months since i started a part time mobile detailing business. Things are going quite well with not much advertising and i am getting more business than i had hoped as...