Search:

Not at all, the standard hose is 5/16” inside diameter adding 1/16” to the inside diameter will not make a major difference at all. Works great with my MTM Foam Cannons.

Note: I also use a...

3/8" Quick Connect Fittings, then again i use a 3/8" pressure wash hose.
I also got rid of all the M22 connections on my pressure washer so no need for M22 hose any more.
I converted from M22 to...

If it’s not your daily driver and you can store it in a garage then why not. If you to dive it in salt and snow then simply no

JC,
I really think you are going to be happy with either machine. Both Rupes and Flex make great machines. I currently use Rupes Machines and I am extremely happy with them. I personally have...

I currently use B&O H5’s and I just ordered there new E8’s

To me everyone who already responded to this post gave you the right steps to take. They key always is decontaminate first,then start with the least aggressive method to see what the paint can take...

Just to give everyone some background on Clear Bra’s as I work in the the film coating industry. Clear Bra’s are urathane films so they can can be polished and top coated. You have to watch on what...

Griots Garage Rubber Cleaner and TUF Shine Tire Brush. Best I found so far.
I spray tire down first with Rubber Cleaner wait two min, then I spay my rim down with Sonax Wheel Cleaner.
Wait a min...

The pads will work fine I have been using them with the same machine and washer mod for over a year. I have watched enough YouTube videos and everyone uses thes pads with the RUPES machines.
...

I would recommend upgrading to at least 4 pads, 6 would be even better.
Regarding speed try to stay around speed 4 i noticed at speed 5 the pads due start to degrade faster.
Since you purchased the...

If you can afford it why not go with a SCANGRIP Multimatch and put that on a tripod. They work amazing.

I currently use the SCANGRIP Sunmatch to look evaluate the paint and my work and I love it....

For ceiling lights I would go with tubes

You definitely need more overall light in the garage, I highly recommend led's 6500K.

Then I would get a light stand to hold two led flood lights to focus on the area you are working on...

Yes you can touch this up with clear. It looks like you still have some clear that is ready to come off.

Revemove remaing clear, touch sand with clear preferably 2K clear.

Let dry then level...

I use Rupes pads, Rupes microfiber pads and Meguiar's microfiber pads.

go out and purchase 6 yellow Rupes pads, 6 white Rupes pads and 6 microfiber Rupes pads or cut Dow Meguiar's microfiber...

Looks like it's time to raise the roof on the garage, you need the extra space.

That is a new connector that I have not seen before. It almost looks like a modified air hose fitting. You may need to just purchase the hose extension from SunJoe and then adapt the one end so you...

Hello, I don't have this model of Sun Joe but would be willing to help if I can. Can you send a photo of this connection?

allan,
I got min on eBay, it is the only place I found them.
I think I posted a link on a earlier post regarding this subject in this thread

Mikeb018,
when you are working on scratches or chips you want to build very thin layers and you want to dab the paint on with the smallest brush you can find. Like everyone has previously said Dr....

To me save your self a ton of money and by a shop vac that has a detacable motor that converts into a blower. After you do the research you will see the Mckees is nothing but this a shop vac motor...

I have not found this but I only tried the 15mm adapter with a standard pressure washer hose

Depending on the waterspot you may need to wetsand these spots to get them out. Two hard to tell based on photos.

Here is what I would try.

1) try using a liquid water spot remover, like the...

Tom and Guz,
thanks for the info on the UHS system, I will need to try this system some day.

When I spoke to Jason Rose (RUPES) recently at Detailers Domain event he stated that the UHS system is designed for European Cars that use Ceramic Topcoats. Can the UHS system by RUPES also be used...