I am going to try other brands of iron/fall out remover and let it dwell much longer and see what happens. If a longer dwelling time of other iron removers doesn't touch those spots, then those...
My white car has around 4000 miles and is protected with Adam's graphene spray coating and properly maintained. Today I discovered 4, yes, 4 brown dots on the car. 3 are on the Xpel PPF and 1 on...
Wipers worked fine without the coatings. I have been putting glass coatings on my cars for the last 15 years because it does improve the visibility dramatically - rain/water just rolls off the glass...
Came back home, sprayed some Opti-glass onto a small coating cloth and wiped the blades. It actually made the chatter way worse than before to the point I thought I was going to be breaking...
Hi all, does anyone know if the regular spray bottle top thread is 22mm? If so, does anyone know where I can find a quick disconnect mechanism like the male/female water hose quick disconnect? ...
Anyway I wet sanded the area with 800 grit to 2500 and the cloudiness is certainly gone. But from a certain angle one can still see a faint discrepancy of...
Can anyone tell me what I am looking at? The cloudiness is not on the surface of the clear coat at all. This carbon fiber piece was made using the prepeg dry carbon method and subsequently clear...
Thanks. Yeah there are some marring and swirls as the piano black paint on this car is extremely soft and anything would scratch it. Last time I paint corrected the rear was last Oct and it just...
Thanks Jim. I would like to add that the rear of the car gets extremely hot during drives so perhaps Cquartz won't last as long? Yes I do use Reload and Ech2o on a regular basis so keep the car in...
It seems like with additional coats you are also noticing a change in surface gloss and possible static buildup. The panel I was working on is piano black. Meaning, it's the black of black with...
How many layers of Mohs did you apply? It's interesting that your experience is completely opposite than mine when my environment might actually be better than yours. So perhaps Mohs likes higher...
Yup, because of my schedule I couldn't apply the coating right after Essence was used to polish the previously failed attempt of Mohs. It was about 3 hours in between.....
Thanks for your reply. Can you explain the increase in static after the coating is being wiped off? Have you experienced something similar with other coatings?
Thanks so much for your detailed reply. A few days ago I posted in a different thread on my first Moh's problem https://www.autogeekonline.net/forum/auto-detailing-101/116211-gyeon-mohs-problem.html...
Have used Cquartz UK about 3 years ago on this particular car and I thought it was time to try something different. Well, first try it wasn’t successful as the surface area became cloudy/hazy right...
BTW the entire area was wiped down 3 times using Eraser, with each time leaving the Eraser on the surface for an extended period of time. So, I believe the surface was as bare as humanly possible. ...