I mainly focus on detailing but also offer powder coating and plasti dipping. In cases like yours, hard to reach and plastic trim areas, I keep Goo gone spray GEL handy. Spray....soak....and pressure...
I use the Grey Tolco "T" sprayers for everything. I get them locally for $1.25 and $0.50 per 32 ounce spray bottle. I have had the same sprayers without replacement for the past 5 months and except...
I've seen this happen with 303 before but it was due to the fact that the dash was already beyond help and ashy beforehand. The sun had already eaten through the top layer of the dash and it didn't...
HD Adapt.......White pad......and play with the hand pressure on the machine and done. That Orange pad is causing the marring. I've used the same combo numerous times with great results.
I use the dryer set to low for 5-10 mins (depending on how much is in the dryer and then switch it to "Delicates" for about 25-30 more minutes. For me, microfibers get HOTTER drying in the Florida...
Some people attribute this to heat. I've only seen this in factory finishes (at least in my experience) and I had a painter tell me once that he feels it could be from the paint "baking" process...
HD Speed for me. I tried a sample and have never used another AIO since then. I have had great results with MF pads or foam depending on the hardiness of the paint.
I'm needing to have a reliable detailer in Detroit that can assist a would be client. Unfortunately, I am in South Florida......and that's quite a drive so I can't help her. Either PM me or let me...
Great turnaround while it lasted! Judging from the very dirty tires just 3 days later, I'm guessing maybe they decided to do a little "off-roading" and tried to clean it up after......big no no...
I was basing my choice on the options you gave but didn't really read the part where you mention that you are open to suggestions. Personally, I like the style of these types of vehicles like the...
I myself use my 2009 Scion xB and 2011 Scion xD for detailing when I have to go mobile. I fit everything in both, no problem as I don't carry a water tank or generator. My xB is actually lowered 2"...
I could swear that I wrote this. I was the same especially when I first started and would do family and friends cars. No one ever seemed impressed with my work and started to think I was a failure...
Just picked up a few bottles myself. Love it. Works just as well as Sonax in my opinion and cheaper. Only worked on my wheels. Does nothing for my tires. I'm guessing you meants your wheels?
If I have already done major work on the car myself and it is maintained by ME, maintenance service is usually around $45 and have never had to charge more than $65 in certain cases.
From my experience, it will be as effective as freshly mixed with the exception of it loosing its Blue color. Don't know why it does that for me but it does loose the color. Maybe the heat causes...
I didn't have high expectations.....just wanted to try it out but funny you mention the prep wash part though. I actually had a few cars come in with mold build up on certain parts of the paint and...
I'm sure someone has mentioned it but just in case......did anyone else make the same mistake as me in purchasing Turtle Wax ICE Liquid Clay bar? Purchased it about 6 years ago.....still keep it as a...
