Search:

I would like a copy sent to kris@360detail.com

Thanks so much!

Such great replies and good ideas. Thank you all! Mike I would like to start using that form and am interested in a class if for no other reason than to validate my skills. thank you!

I started detailing for the local Porsche dealership in 98. Learned a lot and was an enthusiast since then. Doing my own cars and such. In 2007 I started 360detail. It was a small detail service I...

I book jobs every where I go now. It's incredible. When people see my setup it helps them make a confident decision they are using a professional. The pressure washer required a little modification,...

Thanks! 2001 Chevy Silverado

Right now anywhere from 400-1200 a week. I work at the fire station every 3rd day and detail on my off days. I expect it to pick up a bit now that I got the trailer wrapped.

All the equipment is at the back door. All exhaust ports point away from walls or towards the back. There's a large space between the generator and pressure washer. These two machines are never...

I decided to extend the drain valve and lines on the compressor and install a water separator. Put some clamps on some hose fittings and hung my Autogeek banner. 38922389233892438925389263892738928
...

38895388963889738898388993890038901389023890338904

I built this shelf out of poplar and 2x4s then used spray on BEDLINER for the coating. This holds my air hose and pressure washer hose reels.
...

I toyed around with buying skid mounted equipment or even looked at a rightlook trailer. You can build your own for less than half. I started with a custom build 6x10 trailer. I probably could have...

3887138872

I do all my own designs. These cards are front and back. I do a lot of bikes and cars so these should appeal to everyone. I don't like cramming a bunch of info on a card.

I have a 6hp Rigid shop vac with the 2.5 in hose. The hose is short and not very flexible. I about to order a custom 30' flexible shop vac hose for this vac. Buying 30' in 2.5"diameter is not only...

Hello Mike,

I wanted to ask you this specifically.

I have a LC backing plate on my mikita and Ive had a few wool pads. They seem to be hard and curve around the backing plate. Not only does...

Sigh. Man I do about 6 cars a week. I've had 2 of these. Great for that weekend warrior. Great for new spots. But really it's no different than a scrub brush, folex, and a full size wet vac. It...

Awesome. Exactly what I was looking for advice wise. I want to hear how it corrects vs a traditional DA.

Aw come on. No one??

I'm currently trying to research the difference between the 15 and 21. I got excited when I saw Mike Phillips did that car using both machines but he didnt really mention much about them like how...

I bought this at Advance Auto to try out.

I did a test on my 31" BF Goodrich AT/KO on my jeep. Just one tire.

Its extremely Shiny. I did NOT like how shiny it is. BUT I put it on a low...

Hi guys,

I just picked up this Optimum Spray gun.

Click here for AG link

http://ep.yimg.com/ca/I/autogeek_2209_77848904

Before I get into the review I want to tell you a little about...

There's a 20-30 gal Husky compressor from home depot on sale from 199 down to 169. That's what I bought. It's 4.3cfm at 90psi. It takes
About 3-5 minutes to fill up to the 125 psi. I set it to 90psi...

Thanks guys. I'll look into those.

The megs glass cleaner did happen to live up to the hype. I do like it better than stoners now. Smells great too.

I have APC + and ARO. APC isn't any different on rims than purple degreaser.

Isn't Meg's wheel brightener only for certain rims?

Any suggestions for a good all around wheel cleaner? I used to use ARO. It's a great tire and wheel well and engine cleaner. But need something with a bit more bite on brake dust. I've considered...

That is exactly what I had planned. Keep the xp for a carpet brush.