I agree that a consumer using a washer for detailing has different needs than a business but if one is only going to use the washer for detailing family cars then -I- would question the need of a...
All those shopping for a washer should keep the above in mind and also be aware that the off time is a requirement by the manufacturer of the motors/pumps.
Its between Kranzle and AR and I am still trying to get the duty cycle on the AR motor/pump-the nice lady at the Kranzel Distributor was able to get me the info in just a few minutes-continuous duty...
Roughly 1/3 to just under 1/2 the amount of water saved with the foamer the way I do it-impressive. Or another way the foamer seems to provide near pressure washer water savings-I think.
Kranzle alleges that their products are 100% designed and manufactured in Germany and the pricing would -seem- to back this up. I have been told that some of the AR models are made in Italy , as for...
Tnks for that link, now I know what the brass screws are for !! - would never has guessed in a trillion years that the top one was for foam adjustment and it makes sense, as the screw becomes loose...
My PC is very old, I most likely got it a year or so after it was introduced-my G9 (with the 5 1/2)" kit was just purchased a few months ago. Posting that the G9 would be an upgrade does not even...
Tnks for the reply. This would be for 'home' use and the budget pretty much allows for what ever it takes to get a very high quality washer, though I would like to spend less than 2 large give or...
Got (in just about 6 days!) the garden hose model, quart size and it greatly exceeds my expectations both in build quality and performance. Our water pressure is probably 'average' 50 psi or so and...
Tnks, I think I recall some posts from years ago about this and will look for more info, until then-what made you experiment with product application, guessing you had difficulties am curious as to...
For more than a few years I have applied SG and let it sit overnight, not once have I had what -I- would think is a difficult time in removing the haze. Some report otherwise and I cannot help but...
Been thinking about the foam gun thing, don't have a hp washer, do have a compressor but this would take about $120 usd or so out of the beer fund.
The alternative would be a gun which attaches to...
Thanks for the reply do you recall where/when the extended dry time was first suggested, I had thought it was directly from Klasse or the US distributor but I am unable to locate the article.
I am going to try machine application of SG just to see for myself but the question is why don't I have issues with letting SG -cure- overnight or for a 13 hr period at least ?
I don't ever recall having what I would call a problem with the Twins either, but as you I do follow the instructions on the bottles with regard to application.