Pretty much spot on in procedure, the only thing I would do different is after extracting all the water from the carpet and padding (and any puddling in the sheet metal) is to follow up with a...
Speaking of spending more than you have to, lol, has anyone considered converting an old parts washer into a pad cleaning station? Already has a nylon brush, pump and heater for...
Same experience as OP, billed as latest greatest thing since sliced clay, so I bought the hype a few years back. Got the entire shebang, pads, cloths and the tiny hand held scrubbers. Worked great at...
Yes, I've got an old Hand Warmer Flex 3401 as well, just tend to gravitate more to picking up the Rupes these days, with the right pad and compound it'll do the same job.
From what I see, the rest of the paint might be salvageable for a vast improvement. We bought a 2006 Trailblazer from an auction in Orlando, black paint, every panel dull and faded. After doing a...
Recently promoted one of mine to another department in the dealership and looking for a replacement. Open to all skill levels and experience, from hobbyist to...
Same here. Another aspect I enjoy is how his content didn't change when his channel and shop grew, he's still just as dedicated to testing, modifying and approving of machines and tools that the...
Being able to adjust color temperature is a great feature to look for, but brutal honesty here, I still have a pair of LED work lamps and a tripod I picked up from Lowes years ago that works great...
We use our Kranzle PW for engine bay cleaning on all of our used car reconditioning and for detail clients. Never had an issue come of it. PW caps out at 1400 PSI, we only use the 40-degree nozzle...
Haven't had to change the backing plate on any of my Rupes (LHR21 Mk3, 75E and iBrid Nano) due to pad separation related damage, the Claw pad removal tool Rupes sells makes it quick and painless to...
It comes down to explaining how they can transform their current expense of out sourcing another company to a gross profit production center by hiring, training and promoting. Especially after you...
Anything to lower the surface friction, like a wax, sealant or ceramic/graphene coating, to make rinsing pollen off quicker/easier would help. Depending on what your water situation is, a drying aid...
Our first steamer, and still only steamer purchase, was the Dupray Hill Injection over 2 years ago. It's withstood high volume, production based demands of used car reconditioning with only a single...
In my experience, dealers offer a spray sealant from lines like First Place Finish, Permaseal, etc. The vendors pitch it to the F&I guys with a video showing how water beads and sheets off after...
We use the CR Spotless DIC-20 dual filter unit in our, mostly production based, shop and due to the extreme TDS count of the county water supply, I use it full time. This results in us replacing the...
Can also confirm they all do that, however we replaced a few wrinkled ones under warranty. So if you are still under 36k, I'd go in for a replacement. Just make sure they check the side panels of the...
After looking at a lot of these products, especially of those on Amazon, the car enthusiast in me spotted that many of them appeared to be using fuel rail stock and that made perfect sense. So I...
