I have a wheel off due to a flat and I decided to coat the rim with Klasse Twins. I've read conflicting opinions on the benefits of layering SG, but lets ignore that and presume layering acrylic...
The first photo isn’t great, but the scratches are have identical paths but are just stacked on top of each other. The separation distance matches the distance...
I got a can of 303 wipes and they can be a bit streaky but you only notice this after everything is dry and you see the spots you missed. Do y’all apply and then go back and check the next day, a few...
Most people find the 5.5 inch pad to easiest to work with.
Orange cutting pads are common to use for AIO's, White polishing pads are typically used to cars with newer paint with few defects....
Mind if I hijack - Do all spray and wipe products contain polymer sealants? All the spray wax products appear to have a synthetic sealant as part of their formula.
Just got a Kwazar 2L foamer to use as a pre-soak before pressure washing at a self-serve place that doesn't allow bucket washing in the bays. The plan is to foam, then pw, and then I picked up a...
Update: I picked up the Poorboy's World Interior Kit and have lightly applying the Enzyme Cleaner to my headliner and seat belt using the $5.99 Synth Brush . I have the Boars Hair Brush, which...
The last time I spilled milk in my car ( I clearly have a problem, all milk jugs are now transported in sealed buckets until reaching their final destination ) it was about half a gallon and the shop...
About a week ago I had roughly 6-8 oz of milk spill in my backseat (Macan black interior). My waterproof dog seat cover caught about 1/3rd and the rest spilled off onto the carpet. It was late, I had...
My car is in the shop, so based on y'alls feedback I decided to cut it down to just two cars: the Rav4 and the Accord. Things did not go as planned, as vehicles were late,...
Tomorrow I will be using my GG DA polisher for the first time! I'll be using a lot of new products, so I wanted to make sure I'm using them appropriately. Apologies in advance for any weird...
Based on this resource I would suggest getting more compounding pads - Here's what you need to get into machine polishing - Recommendations for a beginner by Mike Phillips