-
Junior Member
Dumb question about Rupes foam pad prep - how often?
I'm new to the Rupes world but enjoying everything about this system.
I understand how to prep the foam pads before first use. However, I'm not sure if I do that prep before every session, or just the very first time I use a new pad.
In other words, do used pads need to be prepped? I'm a hobbyist, so there's likely to be some time between the first and then the next use of a pad. Maybe months.
Thanks,
Peter
-
Super Member
Dumb question about Rupes foam pad prep - how often?
RUPES pad priming for the BLUE, GREEN, and UHS PADS.
Every single time you place a FRESH pad of choice from either BLUE, GREEN, or UHS is when you will need to prime the pad.
This is regardless of which session.
—
Yellow and white you can load n’ go.
High-End Paint Correction and Opti-Coat Ceramic Coatings * Portsmouth, NH
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
PM5C thanked for this post
-
Re: Dumb question about Rupes foam pad prep - how often?
Originally Posted by
PM5C
I'm new to the Rupes world but enjoying everything about this system.
I understand how to prep the foam pads before first use. However, I'm not sure if I do that prep before every session, or just the very first time I use a new pad.
In other words, do used pads need to be prepped? I'm a hobbyist, so there's likely to be some time between the first and then the next use of a pad. Maybe months.
Thanks,
Peter
Yeah its just when you start with a dry pad in general. Its not anything you have to do to the pad itself before using it. Some people prime the pads with polish or conditioner to prevent dry buffing during your first section of paint you are polishing. The polish acts as lubrication.
Bookmarks