Thanks: 0
Likes: 0
Dislikes: 0
-
only get swirls w/wool pad and low rpm...??
I do not quite understand why i get decent results (almost LSP ready) noramlly, but when i slow down to work on un even areas and body lines, fenders i get lots of swirls. It seems like i only get great results on flat surfaces??
Ive used a hi speed units, mikita 9227, dewalt 849, etc
why is that??
-
Super Member
Re: only get swirls w/wool pad and low rpm...??
Rotary buffers are more inclined to leave swril marks. It's just the combination of tool, paint and technique. Just finish the polishing with a DA and you should be fine. Most likely it's just soft paint.
PS Make sure the pad stays flat on uneven panels or body lines. Try different pads as well.
***********************
Semper Fi
Ralph
-
Re: only get swirls w/wool pad and low rpm...??
Originally Posted by rmagnus
Rotary buffers are more inclined to leave swril marks. It's just the combination of tool, paint and technique. Just finish the polishing with a DA and you should be fine. Most likely it's just soft paint.
PS Make sure the pad stays flat on uneven panels or body lines. Try different pads as well.
no thats the thing... its on a 2013 mustang, metallic paint. hard as hell.
-
Super Member
Re: only get swirls w/wool pad and low rpm...??
Originally Posted by Rival
no thats the thing... its on a 2013 mustang, metallic paint. hard as hell.
My expierence with Fords is they do have hard paint. Guess I need to know what you are using. It still comes down to equipment, product and technique.
When you say slow down are you talking rpms or arm speed? What polish are you using? What pad? Have you used a DA and if so what were the results?
***********************
Semper Fi
Ralph
-
Re: only get swirls w/wool pad and low rpm...??
I use to work in body shop for 2 yrs. I did the finish buffing after it came out of the booth. 1500, 3k paper than 3m perfect 2 with a white 3m polishing pad.
for this i was a 12-1300 rpms. wool pad, 3m perfect 2 and also presta polish (1500).
I got everything out with a PC, wolfgang TSR 3.0 and a white flat pad (5.5).
I just wish i didnt have to re trace these steps. Think its time i ditch the wool for a 6pk of 8.5 inch pads.
Yes, i was just slow arm speed too.
-
Super Member
Re: only get swirls w/wool pad and low rpm...??
Originally Posted by Rival
I use to work in body shop for 2 yrs. I did the finish buffing after it came out of the booth. 1500, 3k paper than 3m perfect 2 with a white 3m polishing pad.
for this i was a 12-1300 rpms. wool pad, 3m perfect 2 and also presta polish (1500).
I got everything out with a PC, wolfgang TSR 3.0 and a white flat pad (5.5).
I just wish i didnt have to re trace these steps. Think its time i ditch the wool for a 6pk of 8.5 inch pads.
Yes, i was just slow arm speed too.
Well I'd say you know what you're doing. 3M is a line used in production work more so than in retail. They do make good products. I too came from that side of the business doing custom painting, and buffing.
I will say 1200 on a RB with a wool pad isn't exactly slow buffing. Foam will finish down better. I stay away from big pads the trend has been to get smaller pads 5-6" maximum. I use a Dewalt minimum speed is 1000 wish it went to 600rpm like the Flex PE 14. Ever since I started using the Flex 3401 so now I rarely find myself using a RB.
IMO the 3401 combines the best of the DA and RB in one tool. Bottom line is a DA is easier to finish out swril free. Glad you found a solution.
***********************
Semper Fi
Ralph
-
Re: only get swirls w/wool pad and low rpm...??
ended up buying a 6' backing plate and am going to start using ccs 6.5 pads on the mikita
thnaks man
-
Super Member
Re: only get swirls w/wool pad and low rpm...??
Originally Posted by Rival
ended up buying a 6' backing plate and am going to start using ccs 6.5 pads on the mikita
That's what I use on my rotary the 6' flexible backing plate and CCS 6.5 pads. A fine cut polish with a gold pad leaves a beautiful hologram free finish.
Second Best One Legged Detailer in The World... That top slot is unattainable
-
Re: only get swirls w/wool pad and low rpm...??
gold, as in yellow and the most aggressive cut?
-
Super Member
Re: only get swirls w/wool pad and low rpm...??
Originally Posted by Rival
gold, as in yellow and the most aggressive cut?
Opposite end of the scale...
the gold has zero mechanical cut where as the yellow has the most aggressive cut.
Second Best One Legged Detailer in The World... That top slot is unattainable
Similar Threads
-
By mwoywod in forum Ask your detailing questions!
Replies: 9
Last Post: 11-02-2017, 08:31 PM
-
By sansa in forum Auto Detailing 101
Replies: 0
Last Post: 02-24-2016, 12:48 PM
-
By ShineTimeDetail in forum Auto Detailing 101
Replies: 1
Last Post: 08-29-2012, 10:40 PM
-
By Legaspi89 in forum Wet-Sanding, Cutting & Buffing
Replies: 4
Last Post: 04-05-2012, 01:39 PM
-
By Meghan in forum New Car Care Products
Replies: 3
Last Post: 11-09-2007, 10:20 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
25 | 26 | 27 | 28 | 29 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks