autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

» Detailing Classes

New Dates Available for the Autogeek Roadshow!
Results 1 to 8 of 8
  1. #1
    Member Red&BlackJacob's Avatar
    Join Date
    Mar 2020
    Posts
    71
    Post Thanks / Like

    3D One With A Rotary Buffer and Lake Country Green Pads

    I am planning on using my rotary buffer and Lake Country Green pads with the 3D One Polish to do a one step paint correction on my friends car. Is there a risk of installing holograms on the paint with this method? Should I also purchase finishing pads? If so I was planning on purchasing two finishing pads of each diameter and 4 of the Green Lake country pads of each diameter backing plates that I have. Otherwise it will be 6 of the Green Lake country AIO pads. Any input I can get is much appreciated.

    Sent from my SM-G975U using Autogeekonline mobile app

  2. #2
    Senior Member Rsurfer's Avatar
    Join Date
    Jan 2007
    Posts
    12,439
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    I have been polishing with a rotary for more years than I can count and still can't finish down hologram free. I have tried every technique, pad combo and polish known to man and still need to finish down with a DA.

    Granted on some colors (white/silver) it may seem hologram free, but with the right light and angle its there.
    This is a scratch pattern that a rotary leaves behind, no getting around it.

    Mike P is an experienced detailer, but I believe he still finishes with a DA especially on dark colors.

  3. Thanks Red&BlackJacob thanked for this post
  4. #3
    Member Red&BlackJacob's Avatar
    Join Date
    Mar 2020
    Posts
    71
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    Quote Originally Posted by Rsurfer View Post
    I have been polishing with a rotary for more years than I can count and still can't finish down hologram free. I have tried every technique, pad combo and polish known to man and still need to finish down with a DA.

    Granted on some colors (white/silver) it may seem hologram free, but with the right light and angle its there.
    This is a scratch pattern that a rotary leaves behind, no getting around it.

    Mike P is an experienced detailer, but I believe he still finishes with a DA especially on dark colors.
    Ok, Thanks I really appreciate the info!

    Sent from my SM-G975U using Autogeekonline mobile app

  5. #4
    Member Red&BlackJacob's Avatar
    Join Date
    Mar 2020
    Posts
    71
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    Quote Originally Posted by Rsurfer View Post
    I have been polishing with a rotary for more years than I can count and still can't finish down hologram free. I have tried every technique, pad combo and polish known to man and still need to finish down with a DA.

    Granted on some colors (white/silver) it may seem hologram free, but with the right light and angle its there.
    This is a scratch pattern that a rotary leaves behind, no getting around it.

    Mike P is an experienced detailer, but I believe he still finishes with a DA especially on dark colors.
    YouTube In this video Mike shows us how to finish down with a rotary. I believe the key is in the amount of downward pressure you allow the machine to press down on the paint. 3D One With A Rotary Buffer and Lake Country Green Pads

    Sent from my SM-G975U using Autogeekonline mobile app

  6. #5
    Senior Member Rsurfer's Avatar
    Join Date
    Jan 2007
    Posts
    12,439
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    Quote Originally Posted by Red&BlackJacob View Post
    YouTube In this video Mike shows us how to finish down with a rotary. I believe the key is in the amount of downward pressure you allow the machine to press down on the paint. 3D One With A Rotary Buffer and Lake Country Green Pads

    Sent from my SM-G975U using Autogeekonline mobile app
    Jeweling paint with a rotary on a vertical panel is easier said than done.

  7. Thanks Red&BlackJacob thanked for this post
    Likes Red&BlackJacob liked this post
  8. #6
    Senior Member Dr Oldz's Avatar
    Join Date
    Aug 2010
    Location
    NE PA
    Posts
    4,222
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    It takes some experience to finish hologram free with a rotary. I have been using a rotary for many years and I still use a DA on some paints to finish hologram free.

    With DA machines being more powerful, compounds and polish technology and pad technology where it’s at today, I would suggest the DA route then as you get involved more, you can give the rotary a shot.
    Jim

  9. Thanks Red&BlackJacob thanked for this post
    Likes Rsurfer, JKDesign, Red&BlackJacob, dwaleke liked this post
  10. #7
    Member Red&BlackJacob's Avatar
    Join Date
    Mar 2020
    Posts
    71
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    Quote Originally Posted by Rsurfer View Post
    Jeweling paint with a rotary on a vertical panel is easier said than done.
    Well, all I currently have is my rotary, which I'm still making payments on so i guess I'm going to have to figure it out, I also now plan to purchase the black finishing pads so maybe I'll just practice on a few junk cars first. I polished this hood the other day.

    Also One thing I liked about the rotary was I didn't have to have multiple machines just change out the backing plates and get the correct size pads, as my budget wont currently allow me to purchase different sizes of DA polishers to fit various surface areas. I do plan to collect more machines I'm just not there yet. Also clients are currently few and far between, until I get my reputation up. 3D One With A Rotary Buffer and Lake Country Green Pads

    Sent from my SM-G975U using Autogeekonline mobile app

  11. #8
    Senior Member
    Join Date
    Jun 2016
    Posts
    244
    Post Thanks / Like

    Re: 3D One With A Rotary Buffer and Lake Country Green Pads

    Rotary is a craft that is not learned over night. It took me countless hours to learn how to properly finish down with a rotary. I’m not saying you can’t do it. But I wouldn’t plan on watching some videos and picking up and thinking you can do it. There are many things on YouTube that look easy. But in reality are a lot harder than they. Stick with it and you will get it.

  12. Thanks Red&BlackJacob thanked for this post

Similar Threads

  1. Replies: 26
    Last Post: 05-19-2019, 12:54 PM
  2. Lake Country Tufted Foam Pads for Rotary
    By Dr Oldz in forum Wool & Foam Buffing Pads
    Replies: 3
    Last Post: 09-01-2018, 09:45 PM
  3. Lake Country Kompressor for a Rotary?
    By hdez in forum Rotary Buffers
    Replies: 0
    Last Post: 09-19-2016, 07:23 PM
  4. quick help!!! rotary lake country Bp's
    By R4IDER in forum Ask Mike Phillips your detailing questions!
    Replies: 3
    Last Post: 10-19-2013, 12:14 AM
  5. Replies: 11
    Last Post: 10-08-2012, 05:58 PM

Members who have read this thread: 63

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» July 2020

S M T W T F S
282930 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31 1