autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

» Detailing Classes

New Dates Available for the Autogeek Roadshow!
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Junior Member gmcvt's Avatar
    Join Date
    Oct 2019
    Posts
    11
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Quote Originally Posted by Loach View Post
    I'm with The Guz on this one. I don't think CQUK 3.0 needs any sort of heavier topper to get great performance.

    I can supplement lighter spray toppers to prolong durability instead and still get really satisfying performance. I haven't tested EXO or Gliss on top of CQUK, but if I had an urge to go with a heavier topper, I probably would go with Gliss V2 rather than EXO. I think Gliss is just a bit more hydrophobic than EXO when fresh and a bit slicker, also easier to work with for me. EXO is heavier, and is more durable than Gliss V2 by itself, but you won't need the heaviness or durability of EXO if you've got the base layer of CQUK.

    I think I'm real close to 2.5 years of total durability out of both CQUK 3.0 and CQuartz TiO2 with fantastic performance using only spray toppers, I might try Gliss V2 on top of CQUK before stripping it off. And maybe show Essence Plus on top of TiO2 to highlight why I wouldn't recommend Essence Plus if you're trying to maintain hydrophobic performance.
    On your spray topper on UK, did you use reload? or something else. I have to admit I like the slickness of C2v3 but again, were into mixing plus I am unsure of its durability compared to reload.
    ***Edit...I went back and reviewed your longterm updates and see that you have used several...my apologies.

  2. #12
    Junior Member gmcvt's Avatar
    Join Date
    Oct 2019
    Posts
    11
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Quote Originally Posted by The Guz View Post
    Hereís the thing with all of these lab claims and so called torture tests. Donít buy into them too much. All of that goes out the window as soon as a particular coating is used and the type of environment and care it is exposed to.

    Take this for what itís worth but Exo spotted on me. One thing it has over UK 3.0 is the slickness as does CSL.

    You want to experiment with Cquartz coating them too UK with TiO2. You get the hardness of UK and the stain resistance of TiO2.

    This is my uncles 2002 Corvette with this combo and it sure looked good. He does not drive that often so it doesnít see too much rain. But a couple years later it still looks good.



    Or you can triple stack the Cquartz coatings like I did on mine. I have yet to pull it out of the garage for a full photo.



    And I saw this on Instagram from CarPro



    There is nothing wrong wanting to experiment so give Exo a try. Someone on this forum have topped their coatings with Gyeon CanCoat.
    Excellent points. Hadn't considered layering /Ti02 with UK. So, say you wanted to skip gliss, would/could you do 2 base coats of UK and use Ti02 as the topper? I know UK's strength assumes two layers, not sure if Ti02 is as durable as UK, so just wasn't sure if that if I did 1 coat of UK and 1 coat of Ti02 if it would compromise longevity.

  3. #13
    Senior Member The Guz's Avatar
    Join Date
    Jun 2013
    Location
    Lawndale, CA
    Posts
    7,051
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Quote Originally Posted by gmcvt View Post
    Excellent points. Hadn't considered layering /Ti02 with UK. So, say you wanted to skip gliss, would/could you do 2 base coats of UK and use Ti02 as the topper? I know UK's strength assumes two layers, not sure if Ti02 is as durable as UK, so just wasn't sure if that if I did 1 coat of UK and 1 coat of Ti02 if it would compromise longevity.
    1 layer of each is all that is required per Corey of CarPro US.

  4. #14
    Junior Member gmcvt's Avatar
    Join Date
    Oct 2019
    Posts
    11
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Thank you!

  5. Likes Craig Encinitas liked this post
  6. #15
    Member Craig Encinitas's Avatar
    Join Date
    Jul 2020
    Posts
    43
    Post Thanks / Like

    Mixing Cquartz and ExoV4

    Quote Originally Posted by gmcvt View Post
    Again, thank you all for your input. I think I'm just gonna stick with UK 3.0 and MAY do a gliss coat. I'm really overthinking this.
    Yes to this.
    I applied two coats of UK 3.0
    Top coat of Gliss
    Quite satisfied with the results


    CarPro Gliss V2 and Cquartz UK 3.0 Hydrophobicity - YouTube


    Gliss does indeed prevent water spotting. About a week after installation, the car was parked unknowingly near sprinklers. It was a worst case scenario, as the side of the car was exposed to the intense summer sun facing west. So the water spots were baked onto the surface.

    For sure, I figured the finish was screwed. But after a hose down (garden hose) and a gentle CarPro reset and wash mit on the spotted area, the spots were gone. Dried clean with no issues.

    Will it stave off a similar situation a year from now? Probably not, but I donít want to find out. Mixing Cquartz and ExoV4

  7. Thanks gmcvt thanked for this post
  8. #16
    Junior Member gmcvt's Avatar
    Join Date
    Oct 2019
    Posts
    11
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Quote Originally Posted by Craig Encinitas View Post
    Yes to this.
    I applied two coats of UK 3.0
    Top coat of Gliss
    Quite satisfied with the results


    CarPro Gliss V2 and Cquartz UK 3.0 Hydrophobicity - YouTube


    Gliss does indeed prevent water spotting. About a week after installation, the car was parked unknowingly near sprinklers. It was a worst case scenario, as the side of the car was exposed to the intense summer sun facing west. So the water spots were baked onto the surface.

    For sure, I figured the finish was screwed. But after a hose down (garden hose) and a gentle CarPro reset and wash mit on the spotted area, the spots were gone. Dried clean with no issues.

    Will it stave off a similar situation a year from now? Probably not, but I don’t want to find out. Mixing Cquartz and ExoV4
    On my wifes BLACK Pilot, I put a coat of gliss on half of the hood. Thankfully I can use it as sort of a test vehicle. I sprinkled some utility water on it (in the garage, not in the sun) and it water spotted both sides but noticeably less on the gliss side. I have not washed it yet to see if the spots will come off. My understanding is the at utility water is worse at spotting BUT is wasnt in the sun either.

  9. Likes Craig Encinitas liked this post
  10. #17
    Senior Member Coatingsarecrack's Avatar
    Join Date
    Dec 2018
    Posts
    2,074
    Post Thanks / Like

    Re: Mixing Cquartz and ExoV4

    Quote Originally Posted by TTQ B4U View Post
    Guilty.

    Sent from my SM-G988U using Tapatalk
    I second this. Just topped it up after a year. Combo looks like liquid glass


    Sent from my iPhone using Tapatalk

  11. Thanks Craig Encinitas thanked for this post
    Likes Craig Encinitas liked this post
Page 2 of 2 FirstFirst 12

Similar Threads

  1. GTechniq Crystal Serum Light & EXOv4
    By bryanviper in forum Auto Detailing 101
    Replies: 5
    Last Post: 07-03-2019, 07:27 AM
  2. GTechniq ExoV4 check in.
    By Mgavin1985 in forum Auto Detailing 101
    Replies: 3
    Last Post: 01-19-2019, 05:16 PM
  3. Mixing APC
    By richy in forum Tricks, Tips and Techniques
    Replies: 13
    Last Post: 05-16-2016, 01:05 PM
  4. Mixing? is it possible?
    By Precision08 in forum Ask Mike Phillips your detailing questions!
    Replies: 7
    Last Post: 10-26-2013, 12:09 PM
  5. Mixing OHC with XMT #3
    By ltoman in forum Auto Detailing 101
    Replies: 28
    Last Post: 12-06-2006, 12:55 PM

Members who have read this thread: 34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» October 2020

S M T W T F S
27282930 1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31