Quote:
As both product will be compared, let's start with a short comparison with Q² Mohs+
Some similaritys of both coatings:
Both of those coatings have comparable durability. Both are multilayer coatings, consisting of the same base-coat (Mohs) and 2 different top-coats. In both cases the top-coat is not a stand-alone coating and can’t be used as such. In both cases the top coat is meant to prolong durability and prevent the base coating from waterspots and lets it cure to it’s maximum abilities safe from chemicals and atmospherical influence.
The differences:
The main difference is the character of the top coat.
Q² Mohs itself is highly hydrophobic (still, not super-hydrophobic like Prime). We strongly belive, that Q² Mohs is a brilliant product and that it will remain a top notch coating for many years. It gives immense gloss, has great chemical resistance and durability. It’s also a superb base for multi layer coating systems.
Phobic applied over Mohs will change it’s character more in the hydrophilic direction. You’re not getting more beading than on bare Q² Mohs, rather a bit less. Still, the water sheets very fast. It has fantastic resistance against staining and pollution combined with very high self cleaning abilities. It adds gloss and depth to the finish.
Bead on the other hand, while applied over Q² Mohs, will change its character in a extremally hydrophobic direction. During the first 12 months it shouldn’t produce any sheeting at all! It very, very hydrophobic, much more than Q²Prime. It also prevents the base coat, but in a slightly different way, as it’s a totally different formula. It’s highly antistatic and much more smooth than Phobic.
THE MOST DURABLE HYDROPHOBIC EFFECT IN THE WORLD.
Q² DURABEAD is a professional set of ceramic automotive coatings for paint, dedicated to authorised detailers only. Containing our hardest Q2 MOHS coating and Q² BEAD top coating, it ensures the highest quality and an incomparable super-hydrophobic coating – probably the long lasting in the world!
SUPERB SELF-CLEANING ABILITY
In all of GYEON’s coatings, self-cleaning ability is very visible and apparent, but Q² DURABEAD exceeds all known standards in this area, possessing not only very strong hydrophobic ability but also being probably one of the most anti-static products for automotive paint, thus attracting much less dirt and dust in the first place.
SPECTACULAR & DURABLE BEADING
Q² DURABEAD is an ultra-advanced, super hydrophobic coating that provides beading that has not been seen before; we believe there is no other glass coating in the world which creates such a long-lasting beading effect. With a contact angle of up to 120" this coating upstages even the fantastic Q² PRIME and lasts much longer.
2 YEARS WARRANTY WITH Q² BEAD
It is recommended to apply two layers of Q² MOHS (three 3 layers is absolutely optimal) and then apply the Q² BEAD coating over the top of these. This process will guarantee a super-hydrophobic effect of water beading along with ultimate durability easily reaching up to 2 years. Like other GYEON coatings, Q² DURABEAD is resistant to any type of chemical with a pH value of between 2 and 11, so harsh acids and alkalis have little effect on this coating.