Review Marine 31 Captains Coating and DP prep polish

[Justin at Final Inspection]

Hi all. My neighbor just picked up and nice looking 26ft Carolina Custom built by Lewis Brothers. Its a wood framed boat that's been glassed over then has a pretty recent AWL Grip paint job. After looking at the already nice condition of the boat I informed him about the Marine 31 Captains Coating with UV50 and he was all excited to have me apply it.

After speaking with Nick about the condition of the boat and the fact it is AWL grip he suggested that before applying the coating I use the DP coating prep polish.

I started with a quick wash using BlackFire waterless wash mixed to the 1:48 dilution. After using the BF WW I went back over it again with BF WW and a fine nanoskin mitt.



Next was the DP coating prep polish. I applied it using my 3401 and a 6in black LC pad. The polish went on super easy and only a little was needed. It wiped off clean too. A little watery so go easy when applying.







After polishing I went back over it with BlackFire coating prep spray to ensure all residue was removed. Next was applying the coating. Nick suggested that I use a nanoskin velcro hand backing plate with a 6in blue LC pad.









Only a small amount is needed to apply the coating. It goes on super easy and levels great using a microfiber rag.

Within minutes of applying the coating I was treated to a super glossy glass finish. I broke the boat into 2 days. One side each evening.

























After allowing the coating to fully cure, I had to test out the water beading. Just like I was hoping for. It was great. The owner was super happy and couldn't stop staring at it!






If any boat owner is looking for maximum gloss and protection. I highly suggest looking into the Marine 31 Captains coating.

[Mike@DedicatedPerfection]

Looking good there Justin. Nice work and review. I like the idea of using a pad to spread the product on those large areas.

I see you don't have the forward handle on the 3401.

Thanks for sharing.

[Justin at Final Inspection]

Looking good there Justin. Nice work and review. I like the idea of using a pad to spread the product on those large areas.

I see you don't have the forward handle on the 3401.

Thanks for sharing.

Thanks Mike! The larger pad worked out great!

I like to palm the top of my 3401. I feel I have more control and its a bit more comfortable for me.