autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Page 1 of 8 12345678 LastLast
Results 1 to 10 of 78
  1. #1
    Super Member The Guz's Avatar
    Join Date
    Jun 2013
    Location
    LA, CA
    Posts
    8,719
    Post Thanks / Like

    2020 Ceramic Coating 1 Year Test

    This should be an interesting test for some of you. Before I get ahead of myself I will mention the run rules for this test.


    1. This will be a 1 year long test without toppers. I do this to show the performance of the coating rather than test a topper that is applied to them. That shows the performance of the topper and not the coating.
    2. Quarterly updates will be provided (3 months, 6 months, 9 months, 12 months).
    3. I will post up an update if a coating or coatings behavior changes. All of you are free to ask for updates but expect a short text answer.
    4. I will be doing a chemical decon during those quarterly updates to see how these coatings perform as contaminant free as possible.
    5. If this test turns out well then I will do one again with other brands.
    6. All coatings have been layered with two coats per the manufacturers recommendations other than Gyeon Syncro and Drexler Ceramic which have 3 layers of total coatings per the manufacturers recommendations.


    NOTE: I will mention that the first layers sat 18 hours before I applied the second layer.

    Products:

    Top Row (Left to right):


    • 22ple HPC – 2 layers (18 hours between layers)
    • 22ple Insanity – 2 layers (18 hours between layers)
    • Gyeon Mohs – 2 layers (1 hour between layers)
    • Gyeon Syncro – 2 layers of Mohs (1 hour between layers) + 1 layer of Skin(18 hours later)
    • Gyeon CanCoat – 2 layers (1 hour between layers)



    Middle Row:


    • Drexler Ceramic - Base Coat 2 layers (18 hours between layers)
    • Drexler Ceramic – Base Coat 2 layers (18 hours between layers) + Top Coat(1 hour after the second layer of Base Coat)
    • IGL Quartz+ - Base (1 layer) + Top (1 layer 18 hours later)
    • SPS Graphene – 2 layers (18 hours between layers)
    • Cquartz UK 3.0 – 2 layers (18 hours between layers)
    • Cquartz Lite – 2 layers (18 hours between layers)



    Bottom Row:


    • Jade Ice - 2 layers (18 hours between layers)
    • Jade Quartz - 2 layers (18 hours between layers)
    • Shine Supply Beadlock Pro - 2 layers (18 hours between layers)
    • Cquartz TiO2 - 2 layers (18 hours between layers)
    • Adams UV Paint Coating - 2 layers (18 hours between layers)
    • Adams UV Spray Coating - 2 layers (18 hours between layers)




    SPS Graphene is placed in the middle to compare it to the other coatings which are quartz based with Gyeon Syncro being an exception. IGL was placed next to SPS to compare two professional coatings. Thanks goes out to the two forum members who supplied IGL and SPS to me.

    22ple Insanity and Shine Supply Beadlock Pro are new coatings that were released late 2019.

    Adams implemented their patented UV ceramic glow technology for these new versions of their coatings that were released late 2019.

    From an application standpoint, I had no issues with any of these. But then again I have been applying coatings for a long time now. But they are all user friendly.

    From a slickness standpoint this is how I would personally rate them. This will vary between each person. I am basing this after a 24 hour cure time from the last applied layer.

    It is by no means scientific but I based this on how the coatings felt as I brushed my hand on the surface. I went over the areas a few times and compared them to each other and based my list on what I my personal ranking.


    1. SPSGraphene – This coating is slick and from experience stays slick for a few months. It barely beat Gyeon Syncro and Cquartz TiO2 in this category.
    2. Gyeon Syncro – Skin has always been the star of the show with this coating. So nice to apply and so slick upon removal. I hope it performs better this time around.
    3. CquartzTiO2 – I don’t recall this coating feeling that slick. It almost felt like it was reformulated a bit. But I have not used it in 18 months.
    4. Adams UV Paint Coating – To me this feels like a sleeper coating. Long term performance will dictate if it can compete with the big names in the coating industry.
    5. Jade Ice – This was a surprise in terms of slickness. Overall real nice to work with.
    6. Drexler Ceramic(Base Coat + Top Coat)– the top coat is what adds slickness to the base coat which is tacky.
    7. Shine Supply Beadlock Pro
    8. Jade Quartz – Tacky went wiped off
    9. Adams Spray UV Coating
    10. 22ple Insanity – The 22ple reps on social media hyped this coating as being slick. I was expecting it to be as slick at the coatings above it.
    11. 22ple HPC
    12. Gyeon Mohs – Tends to tack up as it cures unlike the slick feeling upon wipe off.
    13. IGL Quartz+ - The base is very tacky after it begins to cure. Top has the typical tacky coating sensation. Was expecting this to feel slicker.
    14. Cquartz Lite
    15. Gyeon CanCoat
    16. Cquartz UK 3.0
    17. Drexler Ceramic Base Coat – Very tacky after it begins to cure unlike how slick it is during wipe off.


    In terms of this list it is a toss up between number 5 thru 11. They could easily be arranged in any order. It is that close.

    I went through many suede applicators for these coatings other than Drexler Top Coat, Gyeon CanCoat and Adams Spray Coating which were applied by using a microfiber applicator.



    This is the transition point to the Adams coatings. I will monitor this to see if it is an indicator of the coating degrading over time.



    From a cost perspective (least to most per ml). I separated them into two categories. I took the retail price and did not included any discounts. Smart shopping is the best time to purchase a coating.

    Coating Lite:


    1. Adams Spray Coating 236.5mlat $26 = 0.11/ml
    2. Gyeon CanCoat 200ml at $54.99 = 0.27/ml
    3. Cquartz Lite 150ml at $44.99 = 0.30/ml


    From a cost perspective Adams UV Spray coating comes in the cheapest per ml. Cquartz Lite comes in on the high end out of the tree products. We will see how they perform in the long term.

    Coating Full:


    1. Jade Ice 50ml at $60.48 = $1.21/ml
    2. Drexler Ceramic (Base Coat 30ml, Top Coat 50ml) – An average of 40ml’s includes both products at $69.90 = $1.75/ml
    3. Jade Quartz 50ml at $90.80 = $1.82/ml
    4. Cquartz UK 3.0 30ml at$54.99= $1.83/ml
    5. Cquartz TiO2 30ml at$57.99=$1.93/ml
    6. Adams UV Paint Coating 50ml at $100 = $2.00/ml
    7. Gyeon Mohs 50mlat $129.99 = $2.60/ml
    8. 22ple HPC 30ml at $109.99 = $3.67/ml
    9. Shine Supply Beadlock Pro 30ml at $115 = $3.83/ml
    10. 22ple Insanity 30ml at $134.99 = $4.50/ml
    11. Gyeon Syncro (Mohs 50ml, Skin 30ml) - An average of 40ml’s includes both products at $179.99= $4.50/ml


    I had to take an average for Drexler Ceramic and Gyeon Syncro so their price is not exact per ml. But doing so Gyeon Syncro and 22ple Insanity have the highest cost per ml. Jade Ice comes in at the lowest per ml. We will see how each of these performs in the long term to determine if the performance justifies the price for any of these coatings.

    The next update will be a first wash video to have a baseline of the beading and sheeting for each coating.


  2. #2
    Super Member JWilliams.RadiantDetail's Avatar
    Join Date
    May 2013
    Posts
    710
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    NICE NICE, can't wait for the updates. As far as the coating lites would you say the amount uses for all 3 was pretty close? Adam's is a lot cheaper, if it holds up to their claims that could be a really killer coating lite product.

  3. Likes The Guz liked this post
  4. #3
    Super Member Markymapo's Avatar
    Join Date
    Jun 2018
    Location
    Audubon,PA
    Posts
    662
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Wowwwww! Looking forward to seeing the results.
    2022 Carrera S & Honda CRV Hybrid
    2015 Lexus IS 350, 2016 Ford F-150
    Cobalt 242 (8.1 L block, Volvo outdrive)

  5. Likes The Guz liked this post
  6. #4
    Super Member cyclops's Avatar
    Join Date
    Jan 2016
    Location
    Las Vegas
    Posts
    252
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Wow thanks for doing this. Enjoy all of your product evaluations but this is over the top!

  7. Likes The Guz liked this post
  8. #5
    Super Member spazzz's Avatar
    Join Date
    Jan 2014
    Location
    Madison
    Posts
    1,013
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    This is going to be a good one.

    How many of those can the public NOT purchase at this time?

  9. Likes The Guz, JustJesus liked this post
  10. #6
    Super Member The Guz's Avatar
    Join Date
    Jun 2013
    Location
    LA, CA
    Posts
    8,719
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Quote Originally Posted by j.williams at perpetualradiance View Post
    NICE NICE, can't wait for the updates. As far as the coating lites would you say the amount uses for all 3 was pretty close? Adam's is a lot cheaper, if it holds up to their claims that could be a really killer coating lite product.
    For the CanCoat and Adams since they are sprays then yes about the same. The Adams sprayers are new and they have less mist dispersal. The edge would go to Adams over CanCoat in terms of spraying. CQ Lite is applied more like a coating so hard to equate a spray and drops on a micro suede.

    Quote Originally Posted by Markymapo View Post
    Wowwwww! Looking forward to seeing the results.
    You and me both.

    Quote Originally Posted by cyclops View Post
    Wow thanks for doing this. Enjoy all of your product evaluations but this is over the top!
    Thanks.

    Quote Originally Posted by spazzz View Post
    This is going to be a good one.

    How many of those can the public NOT purchase at this time?
    IGL Quartz+ and SPS Graphene are not available to the public. These are authorized installed only. All the rest can be purchased.

  11. Thanks tmdals0213, VitreousHumor thanked for this post
    Likes VitreousHumor liked this post
  12. #7
    Super Member Cruzscarwash's Avatar
    Join Date
    Oct 2015
    Location
    Desert of California
    Posts
    2,425
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Patiently watching

    Sent from my Pixel 2 XL using Tapatalk

  13. Likes The Guz liked this post
  14. #8
    Super Member PaulMys's Avatar
    Join Date
    Jan 2014
    Location
    Eastern L.I. NY
    Posts
    10,769
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Very cool test Mike.

    Over-the-top info on coatings for the forum.

    Awesome as always.
    It is no coincidence that man's best friend cannot talk.

  15. Thanks The Guz thanked for this post
    Likes The Guz, tmdals0213 liked this post
  16. #9
    Super Member JustJesus's Avatar
    Join Date
    Oct 2014
    Location
    Orange & LA Counties
    Posts
    1,294
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Sweet. Coming from you, I know this will be a good one to follow. Much appreciate run rule #1

    Sent from my SM-N960U using Tapatalk

  17. Thanks The Guz thanked for this post
    Likes The Guz liked this post
  18. #10
    Super Member The Guz's Avatar
    Join Date
    Jun 2013
    Location
    LA, CA
    Posts
    8,719
    Post Thanks / Like

    Re: 2020 Ceramic Coating 1 Year Test

    Quote Originally Posted by Cruzscarwash View Post
    Patiently watching

    Sent from my Pixel 2 XL using Tapatalk
    Same here.

    Quote Originally Posted by PaulMys View Post
    Very cool test Mike.

    Over-the-top info on coatings for the forum.

    Awesome as always.
    Thanks. I figured someone can look back and find something useful in the future.

    Quote Originally Posted by JustJesus View Post
    Sweet. Coming from you, I know this will be a good one to follow. Much appreciate run rule #1

    Sent from my SM-N960U using Tapatalk
    Thanks. I had to get rule #1 across. Some folks get fixated on toppers and that they are required when they are not.

  19. Likes JustJesus, oneheadlite liked this post
Page 1 of 8 12345678 LastLast

Similar Threads

  1. Blackfire Pro Ceramic Coating test
    By Mike Hoekstra in forum Product Reviews
    Replies: 6
    Last Post: 01-24-2021, 02:58 PM
  2. Review: IGL Poly Ceramic Coating - 2020 Porsche 911 Carrera S
    By Mike Phillips in forum Product Reviews by Mike Phillips
    Replies: 13
    Last Post: 09-11-2020, 02:42 PM
  3. 2 Year Ceramic Coating Durability Test! Optimum Gloss Coat
    By Canadian Rider in forum Auto Detailing 101
    Replies: 1
    Last Post: 05-08-2020, 09:44 AM
  4. 2020 Stuart Corvette Club Ceramic Coating Class at Autogeek
    By Mike Phillips in forum Ask your detailing questions!
    Replies: 3
    Last Post: 03-10-2020, 10:01 AM
  5. Boat Detailing Correction and Ceramic Coating Class at MTE 2020
    By Mike Phillips in forum Ask your detailing questions!
    Replies: 15
    Last Post: 01-23-2020, 05:16 PM

Members who have read this thread: 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456