Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
Rsurfer
@ Mike, it's been about 2 months now, have you seen the 40 Ford lately?
No but I have not been to any car shows lately. Been too busy.
:)
Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
Mike Phillips
No but I have not been to any car shows lately. Been too busy.
:)
I thought David was a friend who lived close by, so no problem inspecting the car after a couple of months.
Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
Mike Phillips
I have not noticed my applicator getting crunchy.
I would use it as long as the fibers feel soft. I ain't throwing mine out until it's worn-out.
:)
Roger that!
Sent from my SM-G975U using Autogeekonline mobile app
Re: Review: 303 Graphene Nano Spray Coating
New member here. Great review. A question:
Is there any advantage in letting a coating of the 303 Graphene cure for 24 hours and applying another layer, or is one coat all that is needed ?
Thank you
Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
DwightFrye
New member here. Great review. A question:
Is there any advantage in letting a coating of the 303 Graphene cure for 24 hours and applying another layer, or is one coat all that is needed ?
Thank you
Two coats on the horizontals should give you better protection.
Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
DwightFrye
New member here. Great review. A question:
Is there any advantage in letting a coating of the 303 Graphene cure for 24 hours and applying another layer, or is one coat all that is needed ?
Thank you
In general (I haven’t tried this 303 product) - I always like 2 coats to ensure everything gets touched. And I always feel the results are better after two coats.
Re: Review: 303 Graphene Nano Spray Coating
I can’t remember reading if applying over a car pro ceramic coating is a thing ? Will it adhere ?
Re: Review: 303 Graphene Nano Spray Coating
Quote:
Originally Posted by
tbaz
I can’t remember reading if applying over a car pro ceramic coating is a thing ? Will it adhere ?
That is actually one of my issues with 303 Graphene is that it is advertised as being able to work over just about any coating, wax, or sealant. I am somewhat skeptical that it can work over any coating but I’m hopeful.
Re: Review: 303 Graphene Nano Spray Coating
Way back a few pages I did an A/B test comparison between the graphene 303 and blackfire si02 spray. …It’s now been seven weeks in the weather but I don’t need to take any pictures , they are both beading fine, I can tell absolutely no difference between the two. Both work well.
1 Attachment(s)
Re: Review: 303 Graphene Nano Spray Coating
I just took my new car to a touchless car wash, brought it home, dried it , used my cordless orbital with a black pad to apply a coat of graphene on every surface of the car (except the glass) in about 50 minutes. It was so easy, I love the stuff because you can see exactly where it is so you don’t miss spots, and if you wipe off one panel at a time it comes off very easy.… This is my go to product until there’s a new breakthrough… The gloss is outstanding, and the overall product is cheap and goes a long way.
Only downside is the sprayer is lousy and leaked after the second major use,, so I transferred it to a prima bottle with a good spray head.