Review: 303 Graphene Nano Spray Coating

[bcgreen]

I am anxious to see if there is any difference between TW and 303 Graphene.

[glen e]

Here’s the graphene versus the SI02 from my test above a few pages back, in person the beads are slightly tighter on the graphene side.

This is after sitting for a rainy week out in my backyard. Water was only thing used to clean off the dirt before respraying....

[Jacob Harrod AUTOCLEAN]

Mike,
I spent all day on this van and coated it with the 303 Graphine Nano Spray Coating using your reccomended techniques, and the Cobra MiracleTowels.

Stay tuned for my review of the SONAX BEAST Wheel Cleaner. Heres a teaser pic.

I love the Pinnacle Ultra Poly Clay, and nice choice on the Miracle Towels!

I really liked your technique of using the fluffy side to break open the costing and then the short nap to do another initial buff.

I found this helped me to be very thorough as I tend to miss spots. Not this time though.

I went ahead and coated about 1/2 of the van and then went back and buffed it off. I didn't mind the workout and I felt this was a manageable amount of real estate for me to cover.

Thanks for your review and how to. You really helped me out.

Sent from my SM-G975U using Autogeekonline mobile app

[bcgreen]

Just finished doing my black vehicle and found wiping this product off was a bit more work than I am used to. I applied the product to the whole vehicle before I went to buff off, was tacky and needed a little more pressure than with other sealants and coatings. I had to move the vehicle out into the sun to see multiple areas that needed a 1/2 hr in additional buffing that I usually don't experence with other LSP.
On my next vehicle, Sapphire Blue, I will do one panel at a time and see how that works out. That might be what works for me instead of doing the whole vehicle before the wipe off.
I don't know if TW's version is any better in the buff off step, but I will be watching to see what other people's experience has been.

[dgage]

Reminds me of Gyeon CanCoat when improperly applied. It is supposed to be wipe on/wipe off. I let it sit for a minute like a ceramic coating and I got one heck of a shoulder workout removing it.

[Mike Phillips]

Ever since this product was launched, I keep coming back to a very specific microfiber applicator pad to apply this product.

I'm sharing this with you because it really works great for applying this product to a vehicle. I just wrote this article with some pictures to share my thoughts about the applicator. There are also links to click on to get yours.

Recommendation: Microfiber Applicator Pad for applying 303 Graphene Nano Coating Spray



Extra Large Microfiber Applicator Pad

[Jacob Harrod AUTOCLEAN]

Thank you Mike!

Sent from my SM-G975U using Autogeekonline mobile app

[Jacob Harrod AUTOCLEAN]

Got me some of those applicator pads ordered. I can't wait to give them a try!

I'm hoping to get at least 3 applications out of each applicator pad.

My plan is to rinse the pad immediately after application then dunk it into the bucket with my Wolfgang Microfiber Cleaner and Rejuvenator, wash solution and MF towels.

This way excess product won't be lingering in the applicator so the towels and applicator will come out of the wash process as clean as possible.

I noticed that one of my other applicators did get a little crunchy after 2 or 3 uses, but who knows maybe I waited too long to get it into the pre soak solution.

Sent from my SM-G975U using Autogeekonline mobile app

[Mike Phillips]

Got me some of those applicator pads ordered. I can't wait to give them a try!

I'm hoping to get at least 3 applications out of each applicator pad.

I noticed that one of my other applicators did get a little crunchy after 2 or 3 uses,

I have not noticed my applicator getting crunchy.

I would use it as long as the fibers feel soft. I ain't throwing mine out until it's worn-out.

[Rsurfer]

@ Mike, it's been about 2 months now, have you seen the 40 Ford lately?