autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Page 1 of 4 1234 LastLast
Results 1 to 10 of 37
  1. #1
    Mike Phillips
    Guest

    Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Review: Pinnacle Black Label Diamond Ceramic Coating Pro


    Pinnacle Black Label Diamond Ceramic Coating PRO





    Pinnacle Black Label Diamond Ceramic Coating Pro





    What is it?


    Ceramic paint coating.


    What does it do?

    Seals and protects car paint while adding incredible gloss, depth and shine.Creates a 9H hardness finish to any car's paint to help resist marring and degradation. Provides both sheeting action and a hydrophobic surface, which creates a self-cleaning effect anytime it rains and washing and drying are faster and easier.

    When do I use it?

    After first washing and drying paint in new condition or after first doing any claying and paint correction to older cars.


    Why should I use it?

    To protect your car's finish with a pro grade ceramic coating that easily outlasts conventional car waxes and synthetic paint sealants while at the same time created incredible gloss and shine.




    From the manufacturer

    Pinnacle Black Label Diamond Ceramic Coating PRO is a 9H rated professional paint coating that provides an ultimate high gloss and long-lasting results. With a protection period of up to 4 years, Pinnacle Black Label Diamond Ceramic Coating PRO will minimize damage of chemical staining, UV rays, oxidation, and more on coated surfaces. Coated surfaces will sheet water and maintain a high gloss finish.



    Directions

    Work on cool surfaces out of direct sunlight.
    If necessary, correct and polish paint to remove surface imperfections before coating application.


    1. After washing and drying vehicle, use Pinnacle Black Label Diamond Surface Prep Spray to remove any leftover oils from washing/paint correction.
    2. Apply 3-4 droplets of coating to a foam coating applicator and wipe onto the surface.
    3. Allow a moment for product to flash before wiping excess product away.


    Continue around entirety of vehicle until all painted surfaces have been coated.
    Allow to cure for approximately 12-24 hours – do not expose to moisture in that time.




    2017 Shelby Mustang GT350

    My brother-in-law recently purchased this old 2-door Ford.



    He said in the sun he could see swirlies. (his word not mine). Asked me if I thought I could do anything with it? I said "sure", I'll give you the family and friends discount, drop it off at the shop.


    Paint Inspection

    After the car arrived I inspected the paint. Using the baggie test I found it needed to be clayed. Using a swirl finder light I found it needed light paint correction.


    Paint Correction

    Step 1: Waterless wash
    Step 2: Clayed paint using Pinnacle Ultra Poly Clay and Pinnacle Clay Lube
    Step 3: Machine polished paint using Pinnacle Advanced Swirl Remover using the BEAST with RUPES 7" yellow foam polishing pads.




    How to prep the paint and install the Pinnacle Black Label Diamond Ceramic Coating PRO


    Step 1: Spray the Diamond Surface Prep Spray to a section of a panel and then using a clean, dry microfiber towel, spread the product over the section and then flip to a clean dry side and remove the spray residue.








    IMPORTANT: It's important that you use plenty of clean, un-contaminated microfiber towels to avoid cross-contamination during this prep spray process.







    Mike's Pro Technique Tip

    Before you ever use any microfiber towels on your car's finish you should first visually and through your sense of touch, inspect the towels. Microfiber towels by their very nature are grabby. We love them because of how well they GRAB onto spray residues as well as compound, polish and wax residues, but in this same way they excel at removing unwanted substances off your car's finish they also excel at grabbing un-wanted contaminants onto them and into their weave. Things like sticks, leaves, dead bugs, etc. If you have not read this article or watched the video where I show how to correctly inspect your towels, take a moment to do so.

    How, why & when to inspect your microfiber towels when detailing cars








    Step 2: Install the coating working small sections at a time.

    If you're new to ceramic coatings, the coating world has it's own lingo. The word install simply means to apply. I'm not sure who chose to coin the word install instead of simply using the word apply but as the saying goes, once the Genie is out of the bottle, it's kind of difficult to put the Genie back into the bottle. So don't be confused, you're going to APPLY the coating.



    First place a row of drops across the face of one side of a coating applicator like this,








    Apply the coating using a crosshatch motion

    Then using a crosshatch pattern, apply and spread the coating to a section of paint no larger than around 2' by 2'. Basically divide larger panels like the roof, hood, doors and fenders into smaller sections. Then apply using a back-n-forth and side-to-side motion. Normally you make this crosshatch pattern 4 times over each section of paint and this is to ensure full and even coverage of the coating over the paint.


    Here I'm moving the applicator front to back, that is away from me and then back towards me...





    Next I'll move the applicator over the same section only side-to-side




    Then I'll repeat the above two motions...




    Until I've went over that one section of paint 4 times.





    Step 3: Wait for about 30 to 60 seconds and then give this section of paint a final buff using a clean, soft dry microfiber towel.

    For this coating, the flash time is less than a minute. The word flash is the word used instead of evaporate in coating lingo. There's also a visual aspect to the flashing of the coating or the evaporating of the carrying agents. As the carrying agents, (solvents), evaporate, if you look at the paint from the right angle you will see a RAINBOW appearance in what's left of the coating on the paint. At this point, it's safe to go ahead and wipe this section to remove any high spots. In coating lingo, high spots simply means excess coating.







    Here's the results....












    Ready to race!
    (Of course, on a sanctioned race track)







    Review

    This is a SUPER easy to use coating. It's just as easy as you see in the pictures above. The hard part is always the paint correction steps, that is any claying, compounding or polishing that needs to be performed to remove any contamination, swirls, scratches, oxidation and/or water spots. If you car doesn't need any paint correction then you can simply wash and dry, then go right to Step 1 - that I outlined above.


    Ample Flash Time
    While the stated flash time is less than a minute, I found I could easily wait up to 2-3 minutes before the coating would start to become difficult to wipe-off. There's no need to wait this long as the coating bonds instantly to the paint once applied. It is nice to know you have a little window of time to make working around the car relaxing instead of hurried.


    Easy wipe-off

    Wipe-off is easy using clean, dry microfiber towels. The towels you see me using are one of my favorites for ANYTHING related to working on car paint. They have a flat weave so they are less likely to become contaminated over time. That's important to me. They are of course, soft and gentle to the paint but stout enough to work well for wiping off anything, from compounds to coatings. I'll include a link to a 12-pack below.


    Easy application

    The microfiber block applicator you see me using really makes applying, wait... I mean installing a paint coating easy. After you coat a couple of sections teh entire face of one side of the microfiber block will be wet with coating and then it will glide easier over the paint and make laying down an even layer faster and more effective. The next day, the side of the microfiber foam block that you used to apply the coating will be hard, like pumice. I wash these and then use the other 2 remaining sides. One side has a seam where the microfiber is sewn around the foam core and I don't use this side.



    Super high gloss!

    As you can see by this picture, this coating really makes the paint look wet and glossy.






    9H hardness for long lasting, durable protection

    The 9H hardness protection it leaves behind is tough as nails. In fact, if you leave any high spots by accident on your car's paint, you'll have to use a compound to buff off the high spots. So pay attention when installing this coating or any coating and simply be sure to 100% thoroughly wipe each section after installing the coating to make sure you remove any high spots or excess coating.


    Faster washing and drying

    Besides the gloss, the water beading is out of this world! This high water beading characteristic is caused by the incredible surface tension that is created by the coating and any water that lands on the car. This super water beading effect makes washing your car faster, easier and safer because not only does water want to get away from the surface but it will take everything with it, like soap suds and dirt.


    Let Mother Nature wash your car

    It's true, with a quality ceramic paint coating - when there's a hard rain, the rain will really wash your car. The impact of the rain hitting the coated surface will flush off the car and take any loose dirt with it. I use Mother Nature to wash my own cars simply by leaving the car outside when I know a rain storm is coming.


    Super easy to use with show car results....

    If you're interested in making the jump from car waxes and synthetic paint sealant to the world of ceramic paint coatings, the Pinnacle Black Label Diamond Ceramic Coating Pro will give you up to 4 years of paint protection in a professional grade product but with the ease-of-use that even a first-time can get pro results.






    On Autogeek.com

    Pinnacle Black Label Diamond Ceramic Coating Pro


    Prep Spray

    8 ounces is enough to wipe your car down but I would recommend getting a refill, (link below). I wish this came in a 16 ounce or 32 ounce bottle. When it comes to a Panel Wipe, more is better.

    Pinnacle Black Label Diamond Surface Prep Spray 8 oz


    Refill

    Pinnacle Black Label Diamond Surface Prep Spray 32 oz


    Storm Grey Edgeless Microfiber Towels

    Below is the link to a 12-pack of the towels you see me using on the Shelby Mustang. Compared to a lot of towel options these are in-expensive. I strongly recommend getting TWO 12-packs for a total of 24 towels. This way you have more than enough PLUS you can wash them together (don't mix with other items), dry them and the store them together. It's really important to have nice towels and to also take care of your towels.

    Cobra Storm Gray Edgeless Microfiber Polishing Cloth - 12 Pack


    Microfiber Foam Applicator Blocks

    I also recommend getting a few extra microfiber coating applicators. They work great and they are in-expensive. You can't find these at your local stores so stock up.

    Blue Microfiber Coating Applicator









  2. Likes RamAirV1, Thomkirby liked this post
  3. #2
    Mike Phillips
    Guest

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Check out this video for more info or to see how easy it is to install this pro-grade coating.











  4. Thanks Thomkirby thanked for this post
    Likes RamAirV1 liked this post
  5. #3
    Mike Phillips
    Guest

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    More....


    Here's something I say a lot in the car detailing world, you can quote me on this,


    If you're going to install ceramic coatings - you NEED a great hand-held light.



    And it's true. All you have to do is go out into your garage the next day after installing a ceramic paint coating, move your car out into bright sunlight only to see patches of coating you MISSED. And then you find out what I wrote above is true - it's not like normal car wax that you could easily wipe-off. Nope. This coating is tough as nails. Once it's dried and bonded to your car's paint if you want to remove it you're going to have to use a compound or a polish.

    That's why anyone installing coatings should have a great hand-held swirl finder light. You can use this to inspect each panel and if you find a high spot, (excess coating), you have a window-of-time to remove it before it hardens. If if a few minutes have gone by, often times you can rub the coating you installed over the high spot and as the saying goes,

    Like dissolves like


    And often times you can remove the high spot and leave a uniform layer of protective coating in a single step.

    You NEED a great hand-help light. It's pretty easy to inspect the hood, roof and trunk lid using the ceiling lights in your garage - but what about the fenders and doors?


    Here's my review to the Speed Master Swirl Finder Lights,

    Review: Speed Master Swirl Finder Detailer Light and Speed Master Swirl Finder Detailer Light Pro



    At a minimum, get the hand-held Speed Master Swirl Finder Detailer Light - Part Number: DSM-3CL - this one,

    Speed Master Swirl Finder Detailer Light - DSM-3CL


    The Speed Master Swirl Finder Detailer Light on YELLOW paint!




    I'll turn the light on and cycle through the three different light color options....








    Plus the light comes in handy for so many other car detailing projects.


    I never install a coating without a great hand-held light.




  6. #4
    Super Member Dr Oldz's Avatar
    Join Date
    Aug 2010
    Location
    NE PA
    Posts
    4,462
    Post Thanks / Like

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Sure looks impressive!! The coating also looks great.

    You managed to make white pop. That’s a hard thing to do sometimes. Great work, Mike.
    Jim

  7. #5
    Super Member acuRAS82's Avatar
    Join Date
    May 2017
    Location
    Pittsburgh PA
    Posts
    2,847
    Post Thanks / Like

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Great review as always.

    Of course I’m going to ask what you think of this coating application vs the PBL Paint Coating application. It sounds like this Pro is also really easy. Any thoughts, comparisons or major differences between the two during application?

  8. #6
    Super Member
    Join Date
    May 2010
    Location
    ankeny ia
    Posts
    1,301
    Post Thanks / Like

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    how does the wipe off compare to the new wolfgang ?

  9. #7
    Mike Phillips
    Guest

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Quote Originally Posted by john b View Post

    how does the wipe off compare to the new wolfgang ?

    About the same, they both wipe off easy.

    For most coatings, the only time they wipe off hard is if you wait too long, it's really hot outside or hot in your garage/shop and/or you have a junky towel.




  10. #8
    Newbie Member
    Join Date
    Feb 2020
    Posts
    6
    Post Thanks / Like

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Hi Mike, Did you coat the graphics and or use a separate different coating for the Blue vinyl graphics?

  11. #9
    Mike Phillips
    Guest

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    Quote Originally Posted by Shawn D View Post

    Hi Mike, Did you coat the graphics and or use a separate different coating for the Blue vinyl graphics?
    I coated them with the same coating.

    Did the normal wash, clay, polish, chemically strip and then coated them.



  12. #10
    Super Member Jacob Harrod AUTOCLEAN's Avatar
    Join Date
    Mar 2020
    Location
    El Reno, Oklahoma
    Posts
    754
    Post Thanks / Like

    Re: Review: Pinnacle Black Label Diamond Ceramic Coating Pro

    When applying this coating do you overlap your sections?

    Sent from my SM-G975U using Autogeekonline mobile app

Page 1 of 4 1234 LastLast

Similar Threads

  1. Pinnacle Black Label Diamond Coating Detailer review
    By Sizzle Chest in forum Product Reviews
    Replies: 1
    Last Post: 06-13-2015, 06:05 PM
  2. Review: Pinnacle a Black Label Diamond Coating Booster
    By Eric@CherryOnTop in forum Product Reviews
    Replies: 4
    Last Post: 05-13-2014, 02:07 PM
  3. Review: Pinnacle Black Label Diamond Surface Coating
    By Bryan@Autogeek in forum Product Reviews
    Replies: 6
    Last Post: 01-07-2014, 10:42 AM
  4. Review - Pinnacle Black Label Diamond Glass Coating
    By Wors in forum Product Reviews
    Replies: 0
    Last Post: 11-10-2013, 02:28 PM
  5. Replies: 7
    Last Post: 11-03-2013, 06:34 AM

Members who have read this thread: 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456