1999 Trans Am Extreme Makeover - Testing M101 Foam Cut Compound
1999 Trans Am Extreme Makeover - Testing M101 Foam Cut Compound
Last night we put the new M101 Foam Cut Compound to the test using 6 different types of tools and pads to under years of damage to a 1999 Trans Am Anniversary Edition that sat outside, unprotected for over 4 years.
Exposed to South Florida's extreme range of temperature and weather conditions, the factory paint took a beating and was stained with embedded dirt, oxidized as well as filled with swirls, scratches and water spots.
The vinyl graphics were also dried-out, faded, cracked and very brittle making the car look beat and weathered.
M101 quickly removed years of damage no matter what tool or pad combination we used and no matter what the skill level of the user. We had full-time professional detailers, hobby detailers and even one gentleman brand new to the modern detailing scene on hand to help with the transformation.
Like it's little brother, M105, the new M101 not only removed the paint defects with ease, it also left the paint looking as though it were just professionally polished and even waxed.
I'll let the pictures tell the rest of the story.
Before
http://www.autogeekonline.net/galler...rans_Am004.jpg
http://www.autogeekonline.net/galler...rans_Am005.jpg
http://www.autogeekonline.net/galler...rans_Am006.jpg
http://www.autogeekonline.net/galler...rans_Am007.jpg
Close-up next to the hideaway headlight bucket -
Tip: Use a body line to help your camera lens to focus on the paint.
http://www.autogeekonline.net/galler...rans_Am008.jpg
Be prepared to be blown away.... it's as though this car just rolled off the assembly line in 1999...
:D
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Getting busy with Meguiar's 101 Foam Pad Compound!
On the left is Tim aka 57BORNTORUN using the Makita BO6040 with a Surbuf MicroFinger Pad and M101 - On the right is Paul aka Sailfish, graduate of my Detailing Boot Camp Class using a Flex 3401 with a Lake Country Ultra Microfiber Pad with Meguiar's M101 Foam-Cut Compound.
http://www.autogeekonline.net/galler...nished_025.jpg
http://www.autogeekonline.net/galler...nished_026.jpg
http://www.autogeekonline.net/galler...nished_028.jpg
Paul working M101 with the Flex 3401...
http://www.autogeekonline.net/galler...nished_029.jpg
http://www.autogeekonline.net/galler...nished_030.jpg
Tim working M101 with the Makita BO6040...
http://www.autogeekonline.net/galler...nished_031.jpg
John working M101 with the Cyclo Polisher...
http://www.autogeekonline.net/galler...nished_032.jpg
http://www.autogeekonline.net/galler...nished_033.jpg
Jeff working M101 with the G110v2...
http://www.autogeekonline.net/galler...nished_034.jpg
http://www.autogeekonline.net/galler...nished_035.jpg
Jay the new owner of this Trans Am working M101 with the Flex 3401...
http://www.autogeekonline.net/galler...nished_036.jpg
http://www.autogeekonline.net/galler...nished_037.jpg
Jeff Bell, a full-time professional detailer always helps me with the more intricate or complex areas to buff, here he's working M101 with the Griot's 3" Mini Polisher using a Meguiar's 3" Microfiber Cutting Disc...
http://www.autogeekonline.net/galler...nished_038.jpg
http://www.autogeekonline.net/galler...nished_039.jpg
Me working M101 with a DeWALT 849X with a Meguiar's W7207 Foam Cutting Pad...
http://www.autogeekonline.net/galler...nished_040.jpg
http://www.autogeekonline.net/galler...nished_041.jpg
Jeff Bell polishing the glass T-tops...
http://www.autogeekonline.net/galler...nished_042.jpg
Here's Jay working M101 using a Meguiar's 6" Microfiber Cutting Disc on a 3M Orbital Air Sander...
http://www.autogeekonline.net/galler...nished_043.jpg
http://www.autogeekonline.net/galler...nished_044.jpg
Jeff using the Meguiar's 3" Microfiber Cutting Disc with M101 Foam Cut Compound to remove the swirls from the round gas cover lid...
http://www.autogeekonline.net/galler...nished_045.jpg
:)
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Very nice work, I can't wait to try the m101 myself. Was THAT much cut necessary for this particular car though?
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Quote:
Originally Posted by
RZJZA80
Very nice work, I can't wait to try the m101 myself. Was THAT much cut necessary for this particular car though?
You would have had to been here to see the condition of the paint in person and also felt it after it was washed and dried.
We used both Speedy Prep Surface towels and Nanoskin Autoscrub Pads to decontaminate it before we started machine compounding.
Seems from what I read on multiple forums the key factor everyone likes about this product is how fast it cuts and I think that's just the nature of the beast, everyone always looking for new next best thing in every product category, compounds, polishes, waxes, trim dressings, waterless washed, etc. etc. etc.
My goal was to share the fun by letting our forum members test out this new compound with multiple tools and take a completely beat finish and see just exactly what this product was capable of.
In person, this car not only looks brand new... it looks like a brand new car with a brand new paint job!
It was a challenge to remove all the old, dried-out and baked on vinyl graphics and even more of a challenge to re-install the new graphics. While the new graphics provide a sharp contrast against the paint the gains in contrast would be null if the paint wasn't as glossy as it looks.
Good question...
:dblthumb2:
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Nice, thanks for that. BTW, what did you choose as a finishing polish after the 101, or are the results just 101 by itself? That would be extremely impressive.
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
For anyone that's never removed old, dried-out, cracked and baked-on vinyl graphics, I have enough pictures to make a pretty good how-to article. For now here's a few pictures to give you an idea. It took about 2 hours to remove all the vinyl graphics and then rub and scrub all the adhesive left behind off the paint AND do it in a way that did not harm the original paint.
Re-applying all of the new vinyl graphics took at around 3 hours...
We didn't just buff this car out, we first removed all the graphics, then buffing it out, polished it and sealed it with a synthetic paint sealant and then applied all of the new graphics... just another furn project on AutogeekOnline.net!
Here's one picture, hang tight for a few more...
Jay heating the vinyl graphics up using a simple Conair Hair Blow Dryer...
http://www.autogeekonline.net/galler...nished_046.jpg
http://www.autogeekonline.net/galler...nished_047.jpg
Here's Ken and I using a Heat Gun, when using a Heat Gun instead of a hair dryer you really need to be careful that you don't get the paint itself too hot...
http://www.autogeekonline.net/galler...nished_048.jpg
New graphics going on... this was hours later after we meticulously buffed the hood to remove most of the Ghosting and all of the adhesive residue...
http://www.autogeekonline.net/galler...nished_049.jpg
http://www.autogeekonline.net/galler...nished_050.jpg
http://www.autogeekonline.net/galler...nished_051.jpg
http://www.autogeekonline.net/galler...nished_052.jpg
Here you can see that we removed the rear spoiler in order to apply the racing stripes to the deck lid...
http://www.autogeekonline.net/galler...nished_053.jpg
After putting he racing stripes on the spoiler we're not re-attaching it...
http://www.autogeekonline.net/galler...nished_054.jpg
http://www.autogeekonline.net/galler...nished_055.jpg
One thing for sure, everyone has a lot of fun during these types of cool projects, makes new friends and gets the chance to use new tools, pads and yes... products like Meguiar's M101 Foam Cut Compound...
http://www.autogeekonline.net/galler...nished_056.jpg
Carefull.... easy does it....
http://www.autogeekonline.net/galler...nished_057.jpg
http://www.autogeekonline.net/galler...nished_058.jpg
Jay installing all the lettering...
http://www.autogeekonline.net/galler...nished_059.jpg
Windshield graphics going on....
http://www.autogeekonline.net/galler...nished_060.jpg
http://www.autogeekonline.net/galler...nished_061.jpg
Here's the wrecking crew, from left to right...
Paul, Ken, Jay, Tim and John...
http://www.autogeekonline.net/galler...nished_062.jpg
Not pictures are Jeff Bell and my co-worker, Jeff Dexheimer who both needed to leave early or find themselves in the dog house with their better half...
My comments...
This was a HUGE undertaking and I would recommend to most people to only tackle the removal of graphics and the restoration of the paint for one day and then after getting some rest tackle re-applying the new graphics.
I don't remember what Jay said the graphics kit cost but you don't want to make a mistake simply because you're tired...
You can't see from my pictures but Jay also had a new interior installed to really bring this classic back to life.
:)
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Fantastic work! :applause:
Just so everyone knows we'll be running a pre-order special on Meguiar's M101 Foam Cut Compound later today. We're expecting to have it in stock in a couple weeks. :dblthumb2:
Re: M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek
Any plans to post the video for this?