Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Mike Phillips and Todd Helme take you step-by-step on how to create a show car finish that creates whiplash using Blackfire Car Care Products.
They start with a completely swirled-out black 2012 Camaro Convertible and end with a swirl-free flawless finish. The steps include using Blackfire Detailing Clay, Blackfire SRC Compound, Blackfire SRC Polish, Blackfire Midnight Sun Ivory Carnauba Paste Wax and much, much more from the Blackfire line of premium quality car care products.
https://youtu.be/-YIYfAS9vR4
Before Shots
This shot is just to frame up the below shot which I cropped out of this shot. The thing to remember is the entire finish, both horizontal panels and vertical panels were completely trashed with scratches.
http://www.autogeekonline.net/galler...maroFin016.jpg
http://www.autogeekonline.net/galler...maroFin017.jpg
This is the passenger side front corner of the hood...
http://www.autogeekonline.net/galler...maroFin018.jpg
Dull, hazy, filled with swirls and scratches and the clearcoat was no where near clear.
http://www.autogeekonline.net/galler...maroFin019.jpg
And this is off a BRAND NEW CAR?
If you watched the Live Broadcast, you saw me clay most, not all but most of JUST the hood. Keep in mind this Camaro has only 2000 miles on it since purchased new. Look at all the brown crud that came off the hood using Blackfire Detailing Clay.
Where has this car been since rolling out of the assembly plant?
Anyone want to guess what the brown stuff is?
http://www.autogeekonline.net/galler...maroFin020.jpg
And here's the beauty shots...
http://www.autogeekonline.net/galler...maroFin001.jpg
http://www.autogeekonline.net/galler...maroFin002.jpg
http://www.autogeekonline.net/galler...maroFin003.jpg
http://www.autogeekonline.net/galler...maroFin004.jpg
http://www.autogeekonline.net/galler...maroFin005.jpg
Blackfire Show Car Makeover
On Autogeek.net
BLACKFIRE Wet Diamond Waterless Wash
BLACKFIRE Poly Clay Bar 200 grams
BLACKFIRE Clay Lubricant
BLACKFIRE Clay Cleaner & Extender
BLACKFIRE Scratch Resistant Clear Compound
BLACKFIRE Scratch Resistant Clear Finishing Polish
BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax 7.4 oz
BLACKFIRE Crystal Seal Paint Sealant 8 oz
BLACKFIRE Interior Protectant
BLACKFIRE Total Eclipse Tire Gel
BLACKFIRE Garage Banner
http://www.autogeekonline.net/forum/.../xyxthumbs.gif
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Excited to watch this after viewing it live when the video was recorded.
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
I hope everyone will join with me in congratulating Todd for doing a great job on our first how-to video together...
Congratulations Todd! :dblthumb2:
Shout out to Yancy!
And of course, AWESOME Camera work and Editing work by Yancy who is extraordinarily talented in so many areas and especially video production.
Yancy does as good or better work all by himself than some of the actual real TV crews I've worked with...
Awesome work Yancy and thank you for always making everyone look like they actually know what they're doing including me...
:bowdown: :bowdown: :bowdown:
Yancy running the boom camera during the Blackfire video shoot...
http://www.autogeekonline.net/galler...maroFin030.jpg
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
If you want to see where the footage for the above video came from, here's the behind the scenes videos...
This video is in two parts...
Part 1 - 2012 Camaro Behind The Scenes Video with Todd Helme and Mike Phillips
http://2012 Camaro Swirled Out MESS!...lips - YouTube
Part 2 - 2012 Camaro Behind The Scenes Video with Todd Helme and Mike Phillips
2012 Camaro Extreme Makeover - Remove Swirls Create Show Car Finish - YouTube
:cheers:
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Quote:
Originally Posted by
Jomax
The brown stuff off the clay, is rail dust from being transported on a train. am I right?
Hard to say or know what the brown gunk might be? Too much of it to be rail dust it's more likely to be just accumulated airborne dirt that had embedded onto the finish.
Trying to explain just how bad the paint was on this brand new Camaro was with words and even pictures doesn't do it justice because it was baaaad.....
Here's a few screen shots from the video, the last one is from the Blooper Yancy added at the very end of the video... pretty funny Yancy...
http://www.autogeekonline.net/galler...eenshot001.jpg
http://www.autogeekonline.net/galler...eenshot002.jpg
http://www.autogeekonline.net/galler...eenshot003.jpg
http://www.autogeekonline.net/galler...eenshot004.jpg
:D
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Quote:
Originally Posted by
Mike.Phillips@Autogeek
Here's a few screen shots from the video, the last one is from the Blooper Yancy added at the very end of the video... pretty funny Yancy...
Just keeping it real lol!
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Threads like this that incorporate both photos and videos do a lot in taking out some of the mystery in detailing. Understanding how to approach a situation, the do's & don'ts, and most importantly the correct method to achieve that spectacular finish is a blessing.
Detailing is as much an art as it is a science. Understanding the interaction between different pads and products and how they impact the finish builds that knowledge base that will last a lifetime..
Thank you Mike & Todd!! :applause:
Re: Video: How to create a Whiplash Finish using Blackfire with Todd Helme & Mike Phillips
Mike or Todd,
I'm curious why no mention of BFWD cure time (I understand it to be anywhere from 8 to 12 hours) before BFMS application? I did jump over to youtube and watch the 2 1/2 hour vid so I jumped ahead often, maybe I missed the mention or do you feel this isn't necessary?
BK