Re: OPM chart for PC-7424xp
Ditto what he said. It would be nice to have a sticky.
Re: OPM chart for PC-7424xp
I do not know the exact settings for the newer 7424XP, but on the Porter Cable site I found these settings for the older PC7424 / Megs G100 polisher.
PC7424 / Megs G100 - OPM settings.
Speeds:
1-2500 OPMs
2-3200 OPMs
3-3900 OPMs
4-4600 OPMs
5-5300 OPMs
6-6000 OPMs
Re: OPM chart for PC-7424xp
The older PC model 7424 settings are NA...
Re: OPM chart for PC-7424xp
This should be very close (I've seen a couple versions):
Griot: 1= 2500 OPM; 2= 3300; 3= 4200; 4= 5100; 5= 6000; 6= 6800
PC7424XP/G110v2: 1= 2500 OPM; 2= 3300; 3= 4000; 4= 4800;
5= 5800; 6= 6800
Re: OPM chart for PC-7424xp
Well after some research here's what I found.
OPM's for Meguiar's G110v2
Speed Setting 1 - 1800 opm
Speed Setting 2 - 2800 opm
Speed Setting 3 - 3800 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm
OPM's for G100/PC
Speed Setting 1 - 2300 opm
Speed Setting 2 - 2350 opm
Speed Setting 3 - 2600 opm
Speed Setting 4 - 3280 opm
Speed Setting 5 - 4780 opm
Speed Setting 6 - 6100 opm
OPM's for Meguiar's G110
Speed Setting 1 - 2560 opm
Speed Setting 2 - 3250 opm
Speed Setting 3 - 3950 opm
Speed Setting 4 - 4600 opm
Speed Setting 5 - 5550 opm
Speed Setting 6 - 6700 opm
OPM's for Meguiar's G220
Speed Setting 1 - 2760 opm
Speed Setting 2 - 3450 opm
Speed Setting 3 - 4150 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5750 opm
Speed Setting 6 - 6900 opm
OPM's for UD Machine
Speed Setting 1 - 2660 opm
Speed Setting 2 - 3950 opm
Speed Setting 3 - 4130 opm
Speed Setting 4 - 4900 opm
Speed Setting 5 - 5240 opm
Speed Setting 6 - 6540 opm
OPM's for Griots 6"
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4200 opm
Speed Setting 4 - 5100 opm
Speed Setting 5 - 6000 opm
Speed Setting 6 - 6800 opm
OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm
Don't take it for gospel and if there are any changes please reply.
Re: OPM chart for PC-7424xp
Quote:
Originally Posted by
merlin
OPM's for G100/PC
Speed Setting 1 - 2300 opm
Speed Setting 2 - 2350 opm
Speed Setting 3 - 2600 opm
Speed Setting 4 - 3280 opm
Speed Setting 5 - 4780 opm
Speed Setting 6 - 6100 opm
I wonder which settings are actually correct?
The speed settings that I got directly from Porter Cables Website for the G100/PC7424 are quite different than what you found. Not saying whether the settings I found or the settings you found are correct as I have no way of knowing for sure. :dunno: :confused:
G100/PC7424 Speeds:
1-2500 OPMs
2-3200 OPMs
3-3900 OPMs
4-4600 OPMs
5-5300 OPMs
6-6000 OPMs
Re: OPM chart for PC-7424xp
Thanks, I don't know for sure what IS 100% accurate. :confused:
I really was looking for the DA speed settings to use the DA MF system.
Megs recommends
4800 for DA MF cutting discs and DA Compound
3800 for DA MF finishing discs and DA Finishing wax
It appears a general "rule of thumb" would be
speed 4 for DA cutting discs and Compound
speed 3 for DA finishing disc and finishing wax
Re: OPM chart for PC-7424xp
I was curious about this so I called Porter Cable. The lady I spoke with told me that each dial setting increments the OPMs by approximately 860. She did emphasize that this is an approximation. So going by this we have:
1 -> 2500
2 -> 3360
3 -> 4220
4 -> 5080
5 -> 5940
6 -> 6800
This looks like it makes sense. If you take the difference between the high and low OPM values, divide that by the difference in the high and low settings, the resultant quotient is 860.
Re: OPM chart for PC-7424xp