Foam Cannon HP Foaming Lance for your Pressure Washer
http://lib.store.yahoo.net/lib/autog...-cannon-hp.jpg
Turn a pressure washer into a high powered foamer!
Cover your vehicle in a flurry of foam quickly with the Foam Cannon HP! This foam lance works with a pressure washer to produce a thick, clinging foam. Give your vehicle a "touch-free" wash with this high powered foam gun. The Foam Cannon HP will blow you away!
The benefit of using a foam gun to deliver the soap to the vehicle is that it doesn't require you to touch the vehicle, which could rub dirt against the paint. The Foam Cannon HP sprays the vehicle with a thick coat of soap to loosen and lubricate dirt. On dusty or lightly dirty vehicles, you may not even need to hand-wash. The Foam Cannon HP minimizes the amount of hands-on contact with the vehicle, which can minimize wash-induced swirls. Plus, the Foam Cannon HP is a blast!
http://www.autogeekonline.net/forum/...Cannon_HP.jpeg
Take your pick, we have Foam Cannon HP's with your choice of Autogeek, Pinnacle or Wolfgang logo and 6 different connectors to choose from.
Autogeek Foam Cannon HP Kit with Free Bonus
Pinnacle Foam Cannon HP Kit with Free Bonus
Wolfgang Foam Cannon HP Kit with Free Bonus
http://lib.store.yahoo.net/lib/autog...m-cannon-4.jpg
DP Xtreme Foam Formula and a Foam Cannon HP!!!
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
My car looks just like that if parked outside in January! What's the big deal?:D
Frosting on a cake. Very impressive foam coating.
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
This is good news. I've been looking for a place that sells foam cannons. Most support the Karcher pressure washers. It's good to see there are options for folks that don't have a Karcher.
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
What fitting do I need for a Campbell Hausfeld? It looks like the Kew/Alto.
I want it to look like this:
http://img.photobucket.com/albums/v1...6/DSC00460.jpg
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
Quote:
Originally Posted by
Two Dogs
What fitting do I need for a Campbell Hausfeld? It looks like the Kew/Alto.
That should be it but if you can post a picture of your current connector I can confirm it for you. We want to make sure that you get the right one for your pressure washer.
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
I too have a Campbell Hausfeld but it is a very old model that is most likely discontinued. The fitting I would need is the Lavor. Make sure you double check or post a picture so we can verify.
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
Maybe you can post a close up picture of the foam cannon's fitting so we can see what that looks like .I have a sears pressure washer the front wand unscrews from the middle so would i screw the foam cannon to the section that is still connected to the handle .I'm sure there is going to be alot of questions about hooking up foam cannons now.Or should just post pictures with our questions ?? Thanks Dwayne
Re: Foam Cannon HP Foaming Lance for your Pressure Washer
Quote:
Originally Posted by
Harleyguy
Maybe you can post a close up picture of the foam cannon's fitting so we can see what that looks like .I have a sears pressure washer the front wand unscrews from the middle so would i screw the foam cannon to the section that is still connected to the handle .I'm sure there is going to be alot of questions about hooking up foam cannons now.Or should just post pictures with our questions ?? Thanks Dwayne
The foam cannon has 1/4" female threads so you could go directly to the cannon without a connector if your wand has 1/4" male threads. Otherwise, you will need a fitting to make the connection.
Best bet is to show a picture of the piece that you are removing and also the fitting that you need to connect to and it will be easy to determine which connector that you need.
Re: Foam Cannon HP Foaming Lance for your Pressure Washer