Gyeon Q2wax

So doing a comparison against a favorite topper/Sio2 sealant of mine from a company in Germany. You could say that this product is “out of this world”

Didn’t post comparison to here because of rules but you can see my thoughts on Autopia.

THIS WAX IS LEGIT.

Beading/ water behavior of the product I love is best I have seen from a product i would not consider a coating or coating lite.

This wax has taller beads and tolls off the car faster (better water tension?)

Product A

https://uploads.tapatalk-cdn.com/202...1469324337.jpg


https://uploads.tapatalk-cdn.com/202...28a3bf871d.jpg

Gyeon wax

https://uploads.tapatalk-cdn.com/202...b43486691a.jpg

https://uploads.tapatalk-cdn.com/202...1d9b4bd4e1.jpg


Compare second if twi pics for height.

For bead shedding i sprayed 4 passes, 2 from left to right and 2 from right to left.

Gyeon is on right:

https://uploads.tapatalk-cdn.com/202...1540f7b782.jpg

Product A:

https://uploads.tapatalk-cdn.com/202...0ac85f16c8.jpg

Gyeon wax

https://uploads.tapatalk-cdn.com/202...5d245bcea2.jpg

If this performance can last 2-3 months gyeon knocked it out of the park.

Looks were comparable but white hard to see a huge difference.


Sent from my iPhone using Tapatalk

Very nice! The water beads look like marbles. How was the wipe off?

Quote:

---

Originally Posted by fly07sti

Very nice! The water beads look like marbles. How was the wipe off?

---

I let it sit for 40 mins instead of 30. 50 degree weather. Pretty easy. It would be a tad sticky in some spots. Not Polish Angel easy but easy.


Sent from my iPhone using Tapatalk

Yep. Mine arrives today to compare against their Skin product inside their Syncro Kit. They won't sell me Skin Separately and tried to make me a deal on the last three bottles of Booster but it still didn't solve my long term desire to have something as hydrophobic as Skin avialble to me outside a full kit.

I love Syncro but it requires 2-3 layers of Mohs then a 3rd or 4th in Skin. That's a lot of time. I've since moved away from their coatings and am sticking with UK 3.0 or SiC which is now my favorite. Skin & Syncro still have an edge on them but at the cost of time.

Quote:

---

Originally Posted by TTQ B4U

Yep. Mine arrives today to compare against their Skin product inside their Syncro Kit. They won't sell me Skin Separately and tried to make me a deal on the last three bottles of Booster but it still didn't solve my long term desire to have something as hydrophobic as Skin avialble to me outside a full kit.

I love Syncro but it requires 2-3 layers of Mohs then a 3rd or 4th in Skin. That's a lot of time. I've since moved away from their coatings and am sticking with UK 3.0 or SiC which is now my favorite. Skin & Syncro still have an edge on them but at the cost of time.

---

I think you'll fine Skin to be slicker w/ better beads and bead movement than the Gyeon Wax (and Booster and CanCoat for that matter). I've yet to find anything that rivals Skin in the beading/hydrophobics department; kinda a bummer that it just didn't last that long for me when I tried Syncro. A towel that slid off a Syncro hood didn't do the same w/ Gyeon Wax. Silicone (Skin) v Fluorine (Gyeon Wax) and I guess silicone wins in this particular department.

We had a slight bit of light rain here today, not enough to get some *really* good beads so hoping tomorrow brings better conditions to stand out in a downpour and watch the Gyeon Wax do it's thing. The light rain on a lightly dusty hood after drying, w Gyeon Wax on passenger side, Gyeon CanCoat on drivers side:

Image Link cuz Forum keeps downsizing it: https://budgetplan1.files.wordpress....6604168347.jpg

Will be interesting to see if tonites somewhat heavy rain forecast cleans these up any.

I haven’t tried the other Gyeon products except CanCoat. I feel CanCoat sheds the beads about the same but the beads seem taller


Sent from my iPhone using Tapatalk

Those beads do look really good. I've never tired Skin, but CanCoat with Cure always created tall, round water beads and when driving a wet car the water would almost leap off the surfaces. Best combo of any coating I've used.

https://uploads.tapatalk-cdn.com/202...7c679cb3b7.jpg


Beading today


Sent from my iPhone using Tapatalk

Gyeon wax:

https://uploads.tapatalk-cdn.com/202...d00d1ee8c8.jpg




PA Cosmic

https://uploads.tapatalk-cdn.com/202...f7690fe08a.jpg





Washed with Optimum Car Wash. Good soap, PH balanced and foams well if that matters. Nice lubricity.

Beads seem to be very similar. Things i’ve notice: Cosmic seems to be glossier. At least on non metallic white. Gyeon Wax sheets the beads off better

Gyeon wax:

https://uploads.tapatalk-cdn.com/202...e631f94966.jpg


You can see where it pools up and runs off the car

Pa Cosmic

https://uploads.tapatalk-cdn.com/202...b1fe8c2d0b.jpg




Another note:

Although I have not notice any degradation The Cosmic is 1.5 years old. Love that the Gyeon Wax has a 5 year life.


Sent from my iPhone using Tapatalk

Got some more rain. I would say at this point Gyeon is winning but I just did a durability test on Cosmic before applying this two to the hood and beading was better than this at the two month mark previously (Cosmic)


Gyeon:

https://uploads.tapatalk-cdn.com/202...e2f8ee5706.jpg

https://uploads.tapatalk-cdn.com/202...38ac1b47d0.jpg

Cosmic

https://uploads.tapatalk-cdn.com/202...a6c581efad.jpg

https://uploads.tapatalk-cdn.com/202...dac53f14dd.jpg


Sent from my iPhone using Tapatalk

Had a quick. HEAVY downpour for five minutes.... neither side handled it well

Gyeon Wax:

https://uploads.tapatalk-cdn.com/202...8bf131076e.jpg

PA cosmic:

https://uploads.tapatalk-cdn.com/202...8d61aaa089.jpg

Got longer out of the cosmic before. Just Reset washed it. Maybe to strong for both products?


Sent from my iPhone using Tapatalk