LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat
LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat
https://youtu.be/ntNvd-Pof6k
After seeing the finished boat, we offered the owner the opportunity to bring his boat to Autogeek where they could re-sand, compound, polish and then install a ceramic coating to give the boat a show car or show boat finish while making it faster and easier to wash, clean and preserve the boat into the future. This LIVE class takes place Thursday, August 27th at 3:00pm Eastern Time
http://www.autogeekonline.net/galler...oating_030.JPG
Here's where you can watch LIVE on Thursday's at 3:00pm Eastern Time
YouTube - You can interact LIVE via the comments section
Facebook - You can interact LIVE via the comments section
Autogeek.com - The products showcased are also on this page
Or watch right here! Refresh your screen at 3:00pm
https://youtu.be/6M-UUDPejP8
:)
Re: LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat
Re: LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat
:bump:
Joining us today via Skype will be the man himself, Tunch Gorin.
He would have joined us in person but his in the Laboratory today doing what he loves and that's being a CHEMIST!
http://www.autogeekonline.net/galler...TunchInLab.jpg
:buffing:
LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat
Done.
After the LIVE detailing class - Royce and I applied 3 applications of the 3D Ceramic Coating.
Coating the outside is a cake walk compared to coating the inside. One thing for sure she’s going to be the shiniest coat on the water.
https://uploads.tapatalk-cdn.com/202...d3b9d616b1.jpg
https://uploads.tapatalk-cdn.com/202...7109079d30.jpg
https://uploads.tapatalk-cdn.com/202...914c7d6f50.jpg
https://uploads.tapatalk-cdn.com/202...365001756a.jpg
:)
Re: LIVE Detailing Class: How to Machine Sand, Cut, Buff & Ceramic Coat a Gelcoat Boat