Originally Posted by
van185
I've detailed cars now for several years and just recently have decided to try a few Coatings. I've mostly used the Carpro CQuartz and recently tried the Uk 3.0 Version. Before applying the coating I used the Carpro Essence and followed that with the Eraser just to make sure. I've done several vehicles and always at the end after the vehicle has set for several days there are one or two places that appear to have light areas of streaks. I only let the Coating set for a minute or so and buff the area really well only using the Carpro Microfiber. I apply two coats of Coating normally 1 hour apart and then about 50-60 minutes later apply the Reload like instructed. The cars looks great inside the shop and then after a couple days when I pull it out into the sunlight I can see a few small places that appear to be small streak on the paint. It's not on all the vehicles but on some. I'm too much of a perfectionist and the streaks are really making me second guess the coating process. Any suggestions on what I'm doing wrong or how to get the streaks out. Tried to take pictures of them but they didn't show up well in pictures. They are only visible in direct sunlight and probably won't ever be noticed by anyone else but me. But they still make me second guess myself on Coating. All suggestions will be appreciated.