When removing oxidation off gel-coat you will get better results faster by using any form of FIBER pad. The fibers act as a form of abrasive and toghether with the abraisves in the Marine 31 All-In-One Gel Coat Polish & Wax will cut, polish and seal in one step.
The Marine 31 All-In-One Gel Coat Polish & Wax
Marine 31 All-In-One Gel Coat Polish and Wax, all in one boat polish wax, boat cleaner wax
is a light cutting cleaner/wax, the heavy cutting cleaner/wax in the Marine 31 line is this one,
Marine 31 Gel Coat Heavy-Cut Cleaner Wax, best boat cleaner wax, gel coat cleaner wax
From my experience - foam "polishing" pads can actually DULL gel-coat. I wrote this in my book too.
Gel-coat likes HARD sharp pads. Fiber cuts better than foam.
There's a LOT of thin fiber pads on the AG store, I don't have time to look them all up but for the most part, any of them will work to cut off oxidation. Avoid the actual "microfiber" pads and get pads that are just short pile length, thin wool pads.
:)