CTS-V Beauty Inside - Major Correction and Coating Done
So a fellow racing club member picked up a really nice 2013 CTS-V and wanted to get himself a little something for the holidays.
Body wise the car is in great shape and has just over 50k on the ODO but it needed some love on the surface. It's pure black which really shows everything and once it's out in the sun or under lights, the true condition of what he was faced with jumped out. It didn't help that early on in his ownership his little one grabbed a key and tried to put a pin stripe down the entire passenger side of the car http://www.columbusracing.com/ubb/eek.gif
With all that was facing it we decided on my Elite Enhancement Correction Service. This service is geared to greatly reduce the appearance of the marring and defects. Topping it all off would be a dual layer protection of CarPro Cquartz UK v3.0.
- Washed: Rinseless Wash with Wolfgang Uber
- Decontaminated: Iron-X / Medium Grade Nano-Mitt
- Compounded: CarPro ClearCut with a Rupes Mille & UHS Pads
- Polished: CarPro Essence with Flex 3401 & Green Hexlogic Pads
- Coated: CarPro Cquartz UK v3.0
- Trim: WETS used to treat the bits of gray trim work and windshield cowling
Here's what the starting point was:
http://www.pbase.com/timothylauro/im...9/original.jpg
Part of what we're seeing here is an attempt by the owner to correct the key marks. Unfortunately when polishing on paint by hand the pressure is never even and will result in the inability of the work to blend properly
http://www.pbase.com/timothylauro/im...8/original.jpg
These Swirls and holograms are what prevents the true depth and beauty of pure black from showing
http://www.pbase.com/timothylauro/im...0/original.jpg
The hood.....these swirls would dominate under the lights of a gas station or the sunshine at a car meet. Critical to remove them
http://www.pbase.com/timothylauro/im...2/original.jpg
Not a problem. Phase one was to lightly compound the surface and remove the defects. Goal here is correction and thus leaving just some minor haze that would easily clear up in the next step of polishing.
http://www.pbase.com/timothylauro/im...1/original.jpg
Same here on the door/sides of the vehicle. Here the haze is a little more visible.
http://www.pbase.com/timothylauro/im...3/original.jpg
Next comes the polishing. Not only does this serve as a means of ramping up the gloss but the polish I use serves as a primer or base-coat for it's corresponding coating
http://www.pbase.com/timothylauro/im...5/original.jpg
The end result becomes a deep black mirror-like surface that will show nicely at a car meet
http://www.pbase.com/timothylauro/im...9/original.jpg
Can't skimp on the wheels or calipers
http://www.pbase.com/timothylauro/im...8/original.jpg
Knocked about 5yrs off the age of the vehicle IMO
http://www.pbase.com/timothylauro/im...7/original.jpg
http://www.pbase.com/timothylauro/im...0/original.jpg
http://www.pbase.com/timothylauro/im...4/original.jpg
http://www.pbase.com/timothylauro/im...6/original.jpg
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Great job man, love those CTS-V’s!
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Sexy! Still on my list to own. Great job on saving that black paint.
Funny as I just had a inquiry about a correction for a black CTSV for a clients wife.
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Absolutely incredible results.
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Great works. Looks terrific. Phil
Re: CTS-V Beauty Inside - Major Correction and Coating Done
That paint was BAD. How did the keyed side come out?
Re: CTS-V Beauty Inside - Major Correction and Coating Done
That looks great. How many hours did you have in that job?
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Quote:
Originally Posted by
fly07sti
That paint was BAD. How did the keyed side come out?
See the passenger side above. 95% of it blended away. Thickness started out at 5.5 to 6 miles so I had plenty.
Quote:
Originally Posted by
DMW
That looks great. How many hours did you have in that job?
9 to 10 total but not straight through. I break it up vs working straight through since I do the work at my home. Started at 8:30 one morning, finished all the wash, decon and compound and polishing at 4pm and left the coating until the next day. Took a couple hours to coat it and then finish up the trim.
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Wow that thing was hammered! Nice save, and sweet ride!
Re: CTS-V Beauty Inside - Major Correction and Coating Done
Awesome job. Question, you compounded with the Mille and polished with the 3401. Is one better than the other when compounding or polishing?