What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Hoping to use my Makita PO 6000C DA to spread on the wax on a regular basis. So to preserve the clear coat, I definitely want the softest most gentle Pad with no cut.
I could use the 3M Ultrafina Blue pad #50388
Ideally would like something as soft (least aggressive) or softer, and not blue to avoid mixing up with my 3M finishing pads and cheaper? If possible.
I have just seen the RUPES 150mm (6") UltraFine Finishing Pad - White. #9.BF150S. Are these as gentle as the 3M ones
Also any recommendations most welcomed.
Also I might consider budget pads (to use as throw away items) provided they are 100% safe.
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Lake Country Black, Red or Gold pads work great for me.
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Quote:
Originally Posted by
fly07sti
Car Pro Gloss Pad.
:iagree::xyxthumbs:
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Quote:
Originally Posted by
fly07sti
Car Pro Gloss Pad.
I agree
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Quote:
Originally Posted by
Submariner
Hoping to use my Makita PO
6000C DA to spread on the wax
on a regular basis.
I could use the 3M Ultrafina
Blue pad #50388
Ideally would like something as
soft (least aggressive) or softer,
and not blue...
I have just seen the RUPES 150mm (6")
UltraFine Finishing Pad - White.
Since I use RUPES White Finishing Pads (4”)
to apply Waxes/Sealants with my 3” GG RO
Polisher...I will recommend RUPES 6” White
Finishing Pads for your Makita 6000C DA.
Bob
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Quote:
Originally Posted by
Submariner
I definitely want the softest most gentle Pad with no cut.
The Lake Country 6.5” Blue Foam Finessing Pads are the only pads that specifically state they have “No Cut” [no cutting ability] and therefore makes them the absolute softest pads on Gods green earth.[emoji290]lol.[emoji23]
https://uploads.tapatalk-cdn.com/201...67d76c2061.jpg
But seriously though, these are the softest pads.. Finessing pad is so soft that I can pair it with Meguiars #7 Show Car Glaze and successfully fill/hide severe defects on clearcoat such as these that were once on my hood.
https://uploads.tapatalk-cdn.com/201...883e9d7f78.jpg
Most people would think it’s impossible to fill these extreme defects with a glaze...
https://uploads.tapatalk-cdn.com/201...cd34a38309.jpg
Softest pad, no cut, all finesse.. How you like them apples.[emoji519][emoji6][emoji4] Megs #7
https://uploads.tapatalk-cdn.com/201...1aefe16098.jpg
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
Quote:
Originally Posted by
Eldorado2k
Sadly. Not sold in the UK :(
Re: What is the softest, least agressive 6” finishing pad to Apply Collinite 476S Wax?
I use the LC Gold 5" for wax/sealant application.