Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Tech Session starts at 9:00am sharp!
This Saturday, Team Autogeek will be at the ACE Café in Orlando from 8:00am to 2:00pm with a Tech Session taking place inside the ACE Café starting at 9:00am sharp and going until 9:30am.
Here's our demo car for this Saturday, it's a neglected 2008 BMW Mini Cooper!
Now this car needs an extreme makeover!
http://www.autogeekonline.net/galler...emo_Car_01.jpg
Paint looks neglected....
Tech Session 1 - Restore the paint
http://www.autogeekonline.net/galler...emo_Car_02.jpg
Headlights are definitely neglected...
Tech Session 2 - Restore the headlights
http://www.autogeekonline.net/galler...emo_Car_03.jpg
Wheels, tires and plastic trim around wheel arches --> neglected
Tech Session 3 - Restore the rims, tires and plastic trim
http://www.autogeekonline.net/galler...emo_Car_04.jpg
You can't see road film on glass "easily" from a picture but when the paint is neglected and stained you know the glass is too...
Tech Session 4 - Machine polish glass and apply glass coating
http://www.autogeekonline.net/galler...emo_Car_05.jpg
Convertible top is a severely neglected - looks like a job for RaggTopp!
Tech Session 5 - Restore and protect canvas top
http://www.autogeekonline.net/galler...emo_Car_06.jpg
Note: here's how you restore a canvas top
NEW Haartz/RaggTopp Convertible Top Brush - How to clean and protect a convertible top
Vinyl graphics might be toast, but we'll see what we can do to bring them back to life...
Tech Session 6 - Restore vinyl graphics
http://www.autogeekonline.net/galler...emo_Car_07.jpg
The ACE CAFE in Orlando
100 W. Livingston Street
Orlando, FL 32801
(Corner of Livingston & Garland)
http://www.autogeekonline.net/galler...Ace_Cafe_m.jpg
ACE CAFE ORLANDO - Facebook
Schedule
7:00am - We'll be there at o set-up
8:00am - Cars & Coffee starts
9:00am to 9:30am - Tech Session inside Ace Café
9:30am to 2:00pm - Autogeek booth will be set up in front of the main entrance for hands-on demos and taking questions
See you at the ACE!
:)
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Just to note....
The first Tech Session this Saturday will be on how to correctly restore the paint on the 2008 Mini Cooper.
I'll be sharing,
- Waterless wash
- Baggie Test
- Detailing Clay
- Orbital Polishers
- Foam Pads
- One-Step Cleaner/Wax
After the Tech Session, myself, Bobby and Yancy will be at the Autogeek booth right out front to answer questions and let people test out tools...
:)
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Ahh, these ones are my bread & butter details. Actually, if it had New Zealand licence plates on it I would've guessed it was a local car.
Mike - this will be somewhat of an Extreme Makeover for this Mini, it sure looke like the perfect before & after vehicle & perfect for showcasing how awesome us detailers are! :buffing:
Have fun team.
Aaryn NZ. :dblthumb2:
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Quote:
Originally Posted by
mc2hill
Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).
A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website. Construction Map | I-4 Ultimate. I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.
I hope to be there.
Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Quote:
Originally Posted by
mc2hill
Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).
Quote:
Originally Posted by
AllanS
A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website.
Construction Map | I-4 Ultimate. I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.
I hope to be there.
Thank you to both of you!
We don’t want to be late.
We’re leaving the Geek at 5:00am - we should be good.
[emoji4]
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
5:00am and we’re on the road...
https://uploads.tapatalk-cdn.com/201...70427e9efe.jpg
:)
Sent from my iPhone using Tapatalk
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
The mini cooper is so cool. I wish I had one.
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!
Quote:
Originally Posted by
tuantranbk
The mini cooper is so cool. I wish I had one.
So you join our forum. Then put your spam links in your Signature Line and think no one will notice. Here's a screenshot of your spam links, werid thing is your links go to a furniture website. To be honest, you would have better luck selling furniture going through normal, honest business marketing strategies instead of spamming a car detailing discussion forum.
https://www.autogeekonline.net/galle...rfurniture.jpg
Hang tight while you ban yourself.
:)