What constitutes a "well-ventilated area" for FK1000P?
I just finished trying FK1000P, and I have mixed impressions of the product. But I'm mostly curious to know what detailers here think a "well-ventilated area" includes. If you read the label of FK1000P, it's got some pretty nasty stuff in it, and has to be treated with care for health and safety. The strong chemical smell was evident from the moment I opened the can. Because of some nearby trees that seem to shed every time I want to detail a car, I usually pull my vehicles into my multiple bay garage for all steps after washing and drying. Use outside is pretty much impossible.
Even though I left the garage doors fully open after pulling in my vehicle, you just couldn't escape that intense smell, and so I began to question if this product can be used in a garage at all. Is a garage with doors open considered "well-ventilated"? I've polished and sealed cars with other products without harsh smells (and without the extreme warnings on the product's label), so I'm not sure I'm interested in continuing use of this product given these circumstances.
Re: What constitutes a "well-ventilated area" for FK1000P?
Maybe use a few fans to evacuate more air?
Re: What constitutes a "well-ventilated area" for FK1000P?
I've just used FK1000K three times in my garage in the last week. If I'm not here in a week, you'll know a garage isn't ventilated enough. :)
Re: What constitutes a "well-ventilated area" for FK1000P?
In addition to the smell and ventilation issues, I just wasn't impressed with it. I had MUCH better results from McKee's 37 360. In fairness, I didn't polish before applying FK1000P, and that would have probably yielded better results, but that would have also added another step that I don't need with 360, and the 360's durability and shine has held up very well on the vehicles I've used it on.
I'm not saying FK1000P is a bad product, but given modern AIO sealants like 360, I personally am not seeing enough extra benefit from FK1000P to make it worth the extra steps and ventilation issues.
Maybe others have a different perspective??
Re: What constitutes a "well-ventilated area" for FK1000P?
Ah....a good example of YMMV, Swedish. I have two new cars I used the FK1000K on (both in my garage, btw). On one of them I used 3D HD Polish+ then topped with FK1000P. On the other car I used McKee's 37 360 in lieu of the HD Polish+ before topping it with the FK1000P. I actually preferred the finish of the 2nd car with 360 over the first car that had the HD Polish+. The FK1000P applied equally well to both cars. (And both are new Fords with the exact same paint color).
I must admit that I'm not even close to a professional detailer, and am more concerned with the protection that's on my vehicles than having a show car shine (although I'm quite pleased with the gloss, which is a tinier bit better on the car with the 360).
Obviously, experiences vary...I can only speak to my (limited) experience.
Re: What constitutes a "well-ventilated area" for FK1000P?
Quote:
Originally Posted by
SwedishRider
If you read the label of FK1000P,
it's got some pretty nasty stuff
in it, and has to be treated with
care for health and safety.
•IMO: It's not that "nasty".
-This is why:
Don't know if you're familiar with
California, USA's very stringent
environmental rules and regulations, but,
FK1000P is California VOC compliant.
(what's known in some circles as:
"No small accomplishment!")
Quote:
Originally Posted by
SwedishRider
The strong chemical smell was evident
from the moment I opened the can.
Many, many, many detailing products
contain petroleum distillates.
Quote:
Originally Posted by
SwedishRider
Is a garage with doors open considered
"well-ventilated"?
I don't ever have my garage doors
open when I detail. (I don't want a
bunch of contaminates coming into
my garage messing up my work.)
Quote:
Originally Posted by
SwedishRider
I'm not sure I'm interested in
continuing use of this product
given these circumstances.
Some people do have issues with
certain detailing products/chemicals;
while others can tolerate the exact
same detailing products/chemicals
and be trouble-free.
I blame it on:
The nature of the (human) beast.
Bob
Re: What constitutes a "well-ventilated area" for FK1000P?
Prior to last Fall when I coated my car, I used FK1000p as my winter protection here in New England for the last 8 years. Great protection and shine that lasted till at least into May.
I pretty much always detail my car in my garage with the door closed and never had a problem with a strong odor.
Sent from my iPhone using Tapatalk
Re: What constitutes a "well-ventilated area" for FK1000P?
Quote:
Originally Posted by
Vegas1
Prior to last Fall when I coated my car, I used FK1000p as my winter protection here in New England for the last 8 years. Great protection and shine that lasted till at least into May.
I pretty much always detail my car in my garage with the door closed and never had a problem with a strong odor.
Sent from my iPhone using Tapatalk
Everyone has their own tolerance levels, like Bob mentioned above.
Being a mechanic pretty much my whole life, I have been around gas, diesel, exhaust fumes, solvents, you name it. None of it has ever bothered me.
Is this a good thing? I'm betting it isn't health-wise. But it's just part of the job.
But some people can tolerate it, and some can't.
2 Attachment(s)
Re: What constitutes a "well-ventilated area" for FK1000P?
Quote:
Originally Posted by
FUNX650
•IMO: It's not that "nasty".
-This is why:
Don't know if you're familiar with
California, USA's very stringent
environmental rules and regulations, but,
FK1000P is California VOC compliant.
(what's known in some circles as:
"No small accomplishment!")
I'm certainly not looking to get into an argument, but I attached two pics of the warnings on the label of FK1000P. It says:
Quote:
Harmful if inhaled. Causes damage to organs through prolonged or repeated exposure.
Attachment 59379Attachment 59380
It goes on to say not to breathe the fumes, and to use only outdoors or in a well-ventilated area.
I did look at my McKee's 360 bottle, and while it does have the usual cautions, it doesn't have the same level of warning that is on the FK1000P. And it's also California VOC compliant.
I won't give up on it just yet- I actually like the idea of using it to top my M37 360 for very long durability and protection... but I may also try to use fans or something to get some air flow in my garage when working with it.
Re: What constitutes a "well-ventilated area" for FK1000P?
Quote:
Originally Posted by
OzzieMike
On the other car I used McKee's 37 360 in lieu of the HD Polish+ before topping it with the FK1000P. I actually preferred the finish of the 2nd car with 360 over the first car that had the HD Polish+. The FK1000P applied equally well to both cars. (And both are new Fords with the exact same paint color).
How long did you wait to allow the 360 to cure before topping with the FK1000P? Using FK1000P as a top to 360 sounds very appealing. I didn't really like the results I got with it (without polishing), but as a top to 360, I would think that would give incredible durability and gloss since the 360 takes car of surface cleaning and polishing.
Anything else you do when using 360 and FK1000P together?
