-
N914 As Panel Prep
Using the search i see a good bit of info on using the above as a WW or RW. For the panel prep i know it is supposed to be mixed 1:8 concentrate to water. But what is the best way to apply it? Spray it on and wipe it off after a short period of time or do i rub it in or what? If you do rub it or buff it what is best to use?
Thanks
-
Re: N914 As Panel Prep
There is not special rubbing or wiping required.
Spray it on the panel and wipe it with a microfiber towel.
The 1:8 ratio makes a excellent wheel/tire cleaner as well.
IMO the best cleaning Rinseless wash I have ever used. Especially on wheels/tires.
Sent from my LG-LS777 using Autogeekonline mobile app
-
Re: N914 As Panel Prep
The following is my panel
wipe/prep routine:
1.) I spray the panel-wipe solution
onto the microfiber towel (trying
to avoid overspray);
2.) Next, using the dampened MF-towel:
I gently wipe off the unwanted sub-
stances from the panel. (Gently, to
avoid inducing any marring to the
just polished paint)
3.) I then use a different, clean-and-dry,
MF-towel to gently wipe away the
remnants of the panel-wipe/unwanted
substances aggregation.
Repeat processes on each panel 'til
mission's completed. Eazy Peazy... :xyxthumbs:
Bob
-
Re: N914 As Panel Prep
Thanks guys for the feedback.
-
N914 As Panel Prep
Use plenty of MF towels. It will streak if you don't.
I like N914 as a WW and RW, but use another product for a panel wipe.
Sent from my iPhone using Tapatalk