RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
RUPES LK900E Mille and LH19E Rotary Polisher
Here's the new RUPES LK900E Mille gear-driven orbital polisher and the new LH19D Rotary Polisher sitting in front of a 1970 454 Chevelle
http://www.autogeekonline.net/galler...PES_01_001.JPG
Here's just three of the cars the students signed up for this class will be working on!
http://www.autogeekonline.net/galler...PES_01_002.JPG
The new RUPES LK900E Mille and LH19E Rotary Polisher
http://www.autogeekonline.net/galler...PES_01_003.JPG
Let's get a little bit closer....
http://www.autogeekonline.net/galler...PES_01_004.JPG
Back to the cars for Saturday's class
http://www.autogeekonline.net/galler...PES_01_005.JPG
This is the real deal, a 1970 Chevelle 454 SS
TRUE Muscle Car and part of the FIRST detailing class in America using the NEW RUPES tools!
http://www.autogeekonline.net/galler...PES_01_006.JPG
I ALWAYS document the before condition of the cars I use in my classes. Don't let the far shot under florescent lights EVER fool you.
http://www.autogeekonline.net/galler...PES_01_007.JPG
http://www.autogeekonline.net/galler...PES_01_008.JPG
This is a fat fendered 1948 Ford Streetrod - I was told about a $40,000.00+ build
It has a 355 horsepower ZZ4 Chevy 350 Crate Engine with a 770R4 transmission, independent front suspension with an Ostrich Leather Interior.
http://www.autogeekonline.net/galler...PES_01_009.JPG
Completely swirled-out and grossly contaminated!
http://www.autogeekonline.net/galler...PES_01_010.JPG
And a 1967 Chevy Chevelle SS 427 with Dual Carbs and a 4-Speed Muncie Transmission
This year, make and model car is always on every Top 10 Muscle Cars List
The students that signed up for this class are going to use RUPES BigFoot Paint Polishing System to restore a flawless show car finish worthy of this car.
http://www.autogeekonline.net/galler...PES_01_011.JPG
"Black is not a color it's a full time job"
http://www.autogeekonline.net/galler...PES_01_012.JPG
This is going to be an incredible class with RUPES tools, pad and products plus Jason Rose - the Global Director of Training.
This weekend's 2-day classes start at 7:30am sharp (just like all my classes). We start EARLY because these are hands-on and there's LOTS of hands on!
If you were on the fence about signing up for this class and didn't - you snooze you lose....
Congratulations to all the guys that did get signed up you're going to have a BLAST! And... learn a lot too!
:)
Re: NEW RUPES LK900E Mille and LH19E Rotary - at Autogeek!
:buffing:
For Class Members Tomorrow
(Friday afternoon)
I'm sending the link to this thread to everyone signed up for this class. If you're local or if you were one of the guys flying in from another state, (either way), and you're in Stuart tomorrow, feel free to come by Autogeek's Show Car Garage after 2:00pm and if you want - you can give me a hand washing and decontaminating these three cars.
We've done the baggie test and all three cars are complete and utter failures in this area. So before the class start Saturday at 7:30am I'm going to need to get these three cars ready and if you want to help out plus check out Autogeek's Show Car Garage then either reply to this thread or reply to the e-mail I sent you.
:)
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
I'm looking forward to the feedback on the Mille.
I liked the capabilities of my 3401, but with my back it just worked me too hard. I spent a fair amount of time with it, not a lot, but still can't help wonder if part of the issue was the counter clockwise rotation.
Every DA, pneumatic or electric and every rotary polisher I've used in the 35 years previous to the 3401 were clockwise rotation. You knew how the machine was going to react in situations.
Love that Chevelle!! I had one in high school.
Re: NEW RUPES LK900E Mille and LH19E Rotary - at Autogeek!
Got a long trip from Georgia to Fort Lauderdale then back to you by 2ish .... leaving earlier now ... would love to help out :)
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
***Update***
Just added some fresh pictures above showing the classroom all set-up plus the RUPES swag for everone attending.
I also just posted a Facebook LIVE video to my Facebook page showing the classroom and the cars close-up if anyone wants to check it out...
My FB page
https://www.facebook.com/Mike.Phillips.Autogeek
Direct link to the LIVE video...
https://www.facebook.com/Mike.Philli...0474003319964/
Time to shut down Autogeek's Show Car Garage!
:)
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
Wow! Looks to be another awesome class!
One thing is certain, RUPES sure knows how to make some beautiful looking tools! I'm sure their performance isn't lacking either!
Really curious to hear more hands on feedback of the Mille
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
Been using these two polishers daily for the past few months, doesn’t get better than these.
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
Quote:
Originally Posted by
Ronin47
Been using these two polishers daily for the past few months, doesn’t get better than these.
How do you like the Mille in DA mode? Any better than the Makita?
Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
Re: RUPES LK900E Mille and LH19E Rotary Polisher at Autogeek!
Quote:
Originally Posted by
Ronin47
Been using these two polishers daily for the past few months, doesn’t get better than these.
Remind us... what country are you in?
Do you use these tools with the RUPES pads and products?
:)