Duragloss #501 Strikes Again!
Performing a winter prep on a 2008 Dodge Charger R/T with no intentions of a correction, I performed a test spot and here is the result:
Before:
http://www.autopiaforums.com/gallery...um/DG501-1.jpg
After:
http://www.autopiaforums.com/gallery...um/DG501-2.jpg
Applied via Griot's Garage DA, 5.5" white LC pad, speed 5, very little pressure. Don't underestimate this product.
*Photo resized using Kodak Easyshare, no enhancements made.
http://www.autogeekonline.net/forum/...oss-501-a.html
Re: Duragloss #501 Strikes Again!
Nice! I have had some nice results with 501 too!
Re: Duragloss #501 Strikes Again!
I also use 501 with an LC 5.5 white pad :)
And, yes, results are awesome. What Collinite is to wax with durability and inexpensiveness, Duragloss is to sealants.
Re: Duragloss #501 Strikes Again!
Quote:
Originally Posted by
rwright
Am I missing something? They don't look different to me.
Re: Duragloss #501 Strikes Again!
Richard,
Duragloss 501 really cleaned up that section on the photo and the after shot looks perfect!! :dblthumb2:
Re: Duragloss #501 Strikes Again!
Quote:
Originally Posted by
Capa1970
I also use 501 with an LC 5.5 white pad :)
And, yes, results are awesome. What Collinite is to wax with durability and inexpensiveness, Duragloss is to sealants.
You arre right on this.
Re: Duragloss #501 Strikes Again!
Quote:
Originally Posted by
sunday joe
Am I missing something? They don't look different to me.
The top picture has a haze , the bottom picture is clear and glossy, no haze.
Re: Duragloss #501 Strikes Again!
Re: Duragloss #501 Strikes Again!
Quote:
Originally Posted by
Capa1970
I also use 501 with an LC 5.5 white pad :)
And, yes, results are awesome. What Collinite is to wax with durability and inexpensiveness, Duragloss is to sealants.
Very well said!! :dblthumb2:
Re: Duragloss #501 Strikes Again!
Quote:
Originally Posted by
BobbyG
Richard,
Duragloss 501 really cleaned up that section on the photo and the after shot looks perfect!! :dblthumb2:
It kind of shocked me BobbyG due to the fact that I wasn't applying much pressure, mostly just to keep the machine level and guide it. I'm going to grab some good 50/50's today and hopefully I remember to take after pictures so I can share. :)