Re: Which Brand 3" Backing Plate?
That's a lot of good info. Thanks everyone!
I think for now I'll order the pads I want to try out, and just get 1 backing plate for each size I need. If the hook & loop becomes an issue then I'll try matching brands. I don't want to spend the extra cash up front if I don't have to.
Re: Which Brand 3" Backing Plate?
I would highly recommend Buff and Shine backing plates and pads. There's been numerous complaints about Lake Country and their lack of customer support.
Re: Which Brand 3" Backing Plate?
Quote:
Originally Posted by
anonymoususer
I would highly recommend Buff and Shine backing plates and pads. There's been numerous complaints about Lake Country and their lack of customer support.
I had a 3 inch BnS plate come apart on my with my G110v2 running a Meg's 3" mf pad.
They are not without fault either.
Re: Which Brand 3" Backing Plate?
Quote:
Originally Posted by
anonymoususer
I would highly recommend Buff and Shine backing plates and pads. There's been numerous complaints about Lake Country and their lack of customer support.
I am unaware of these circumstances. We try our best and bend over backwards to provide the best customer support possible.
If you ever have a problem with our product - please contact us here at Lake Country.
Re: Which Brand 3" Backing Plate?
Quote:
Originally Posted by
The Pad Man
I am unaware of these circumstances. We try our best and bend over backwards to provide the best customer support possible.
If you ever have a problem with our product - please contact us here at Lake Country.
You can start by following up with the other threads on negative experiences with Lake Country. Just do a search.
I've actually had an overall a positive experience with Lake Country though i feel my Flat Foam pads may have failed a little prematurely. However in this day and age of customer service and online reviews, i'm very concerned with what i've read so far and thats why i already started to switch to Buff and Shine.
Re: Which Brand 3" Backing Plate?
Quote:
Originally Posted by
swanicyouth
Theoretically it makes sense. But, I still feel when people are cooking pads and melting BPs it's user error. I have BnS, LC, Griots, & Rupes plates on various machines and have used most brands of pads made made interchangeably and have never cooked a single pad or plate.
:iagree: with that statement.
Quote:
Originally Posted by
smack
I had a 3 inch BnS plate come apart on my with my G110v2 running a Meg's 3" mf pad.
They are not without fault either.
Every company has had a failure before. We correct any problems that may arise and take criticism very seriously.
If you do ever have a problem with a Lake Country product, PLEASE take a picture with your email address and date visible in the photo and contact us.
Re: Which Brand 3" Backing Plate?
Sorry if this is veering a bit off topic, but who makes-sells the PC Guard for the Porter Cable Shroud?
TIA, Mark
Re: Which Brand 3" Backing Plate?
Quote:
Originally Posted by
MarkD51
Sorry if this is veering a bit off topic, but who makes-sells the PC Guard for the Porter Cable Shroud?
TIA, Mark
Never mind folks, I found it, a company called show car supplies. Just ordered the PC Guard.