Can I apply and remove NXT 2.0 with the G110v2?
Printable View
Can I apply and remove NXT 2.0 with the G110v2?
Your amazing!!!:urtheman: Is there something you dont know?
Since we are talking about furniture, can I use Collinite Insulator Wax to protect my Granite counter tops?
Tell me if I am correct: Most abrasive to Less
1. Scratch X
2. UC
3. Swirl X
4. NXT 2.0
Are there any consumer products in between Im missing?
Yes, use a finishing pad on about the 3.0 to 4.0 speed setting. Let it fully dry before removing.
I don't think there will be any problems. Flitz actually offers some Granite specific products, Flitz Granite Wax Plus
http://ep.yimg.com/ca/I/autogeek_2106_2507953.jpg
See this article,
The Aggressiveness Order of SMAT Products - This might surprise you!
:)
It says on your website "Meguiars Ultimate Compound cuts as fast as harsh abrasive compounds but without scratching… even on clear coat finishes"
So does that mean its safe to use it as a polish? Also if it wont scratch the clear coat then I dont have to follow it up with a less abrasive polish after correct?
All the marketing language is confusing me I dont know what to believe.
Whats the difference of using a Quick Detailer vs Water or Windex to remove stuff from your car in between washings? It just seems like another thing to buy.
Mike, you should change your name to Mr. W i k i
Mike:
I think you sold one of the GG specials today. I was looking for more information on the GG polisher and came across this thread.
Daily Deal Griot's Garage Random Orbital Polisher & Pad Kit
Although it has the 6.5 in pads I have enough pads and a 5in backing plate to use the smaller pads.
Sadly I will be retiring my original PC that has served me very faithfully for over 8 years.
One of my buddy,s has been on me to move up to a PCXP and I believe he has plans for my old PC as a donation to a member in our car club.
Well, it cuts hard and fast, and it can leaving hazing and micro marring behind. I say can because it doesn't always happen. Depends on the paint and clearcoat. UC is akin to 105, and most people follow 105 with 205, and SwirlX is akin to 205. So it may be a good idea to have UC and SwirlX on hand just in case you need to go over the paint again to really polish it up to your liking.
Windex on...paint? Quick Detailers have lubricants and cleaners to help break up the bird droppings and sap that fall onto your car, so when you go to wipe the droppings off with a thick microfiber towel (the longer nap keeps the dirt in the towel instead of moving it around), you reduce and eliminate the chances to installing new swirls into the paint.
UPDATE
I used the G110v2 about 6 times, then it stopped working. It does a great job but doesn't last. Took the DA to Megs Irvine they mailed me a new one. The new one makes a grinding sound an the motor get hot really fast will be going down to Irving AGAIN today to ask for a replacement.
A quality spray detailer will offer high lubricity to lubricate the surface while wiping, it will encapsulate dirt and dust to protect a delicate clear coat finish and it will leave the paint looking clear and shiny.
Water and glass cleaners won't do any of the above well enough to meet the needs and demands of a true car enthusiasts.
I shudder at just the thought of trying to use plain water or glass cleaner on a highly polished and waxes finish to remove dirt and dust build-up.
:eek:
I know too many people that have forgotten more than I'll ever know...
:D